Owner`s manual

7-EN
01GB05iDAX305S.fm
ALPINE iDA-X305S 68-13530Z44-A (EN)
Setting the Time and Calendar
1 Press and hold (FUNCTION/SETUP) for at least
2 seconds to activate the SETUP selection mode
.
2 Rotate the Double Action encoder to select
“General”, and then press /ENTER.
BLUETOOTH General Display iPod Audio
3 Rotate the Double Action encoder to select
“Clock Adjust”, and then press /ENTER.
The calendar setting mode is activated.
When the year is set, proceed step 5.
4 Rotate the Double Action encoder to select year,
month, day, hour or minutes to be set.
5 Press /ENTER.
The year setting mode is activated, and the year blinks.
(When “year” is set)
6 Rotate the Double Action encoder to set year, and
then press /ENTER.
The setting for year is complete. (When “year” is set)
7 Repeat steps 4 to 6 above to set month, day, hour
and minutes.
8 Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.
Displaying the Calendar/Time
Press VIEW.
The calendar/time is displayed. Pressing VIEW again will
return to normal mode.
• Selecting any tuner or iPod/iPhone function while in the clock
priority mode will interrupt the time display momentarily. The
function selected will be displayed for about 5 seconds before the
time returns to the display.
• If an iPod/iPhone is connected, the album cover screen can be
displayed. Refer to “Changing the Display” (page 12).
• In Auxiliary / Auxiliary+ mode, Calendar/Time is not displayed.
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
01GB00iDAX305S.book Page 7 Wednesday, December 23, 2009 10:01 AM