Owner`s manual

9-EN
01GB05iDAX305S.fm
ALPINE iDA-X305S 68-13530Z44-A (EN)
Presetting Stations Automatically
1 Press BAND repeatedly until the desired radio band
is displayed.
2 Press and hold TUNE/A.ME for at least 2 seconds.
“Auto Memory” is displayed while the automatic memory is
in progress. The tuner will automatically seek and store 6
strong stations in the selected band. They will be stored 1 to
6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press BAND repeatedly until the desired band is
displayed.
2 Press (PRESET).
The Preset screen is displayed.
3 Rotate the Double Action encoder to select a
radio station.
4 Press /ENTER.
The display shows the band, preset number and frequency
of the station selected.
• Press in the outer ring and rotate the Double Action encoder to the
left or right on the Preset screen, you can switch the Preset screen of
another band.
FM-1 FM-2 AM FM-1
You can also change the desired radio band by pressing BAND.
When an iPod/iPhone is connected to the iDA-X305S by using the
proper cable, the controls on the iPod/iPhone are not functional.
• Internet or telephone functions, etc., of the iPhone or iPod touch are
not controllable from the unit, but these functions can be controlled
using the iPhone or iPod touch itself.
• If you connect an iPhone to the iDA-X305S, it can be used as an
iPod. If you use iPhone as a hands-free phone, you need the optional
BLUETOOTH INTERFACE (KCE-400BT).
• This unit does not support the iPod FULL SPEED connection.
Therefore, even if you connect an iPod/iPhone using the FULL
SPEED connection cable (KCE-433iV) on the BLUETOOTH
INTERFACE (KCE-400BT), you cannot operate the iPod/iPhone.
• This unit does not support video playback from iPod/iPhone.
About iPod/iPhone usable with this unit
• Confirmed devices regarding Made for iPod. Correct function
of earlier versions cannot be guaranteed.
iPod touch (Late 2009): Ver.3.1.2
iPod nano (5th generation): Ver.1.0.2
iPod classic (Late 2009): Ver.2.0.3
iPod touch (2nd generation): Ver.3.1.2
iPod nano (4th generation): Ver.1.0.3
iPod classic (120GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.2
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80GB, 160GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
iPod nano (1st generation): Ver.1.3.1
• Confirmed devices regarding Works with iPhone. Correct
function of earlier versions cannot be guaranteed.
iPhone 3GS: Ver.3.1.2
iPhone 3G: Ver.3.1.2
iPhone: Ver.3.1.2
• For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
http://support.apple.com/kb/HT1353.
iPod/iPhone
SOURCE
/
/ENTER
Double Action encoder
VIEW
(FUNCTION/SETUP)
01GB00iDAX305S.book Page 9 Wednesday, December 23, 2009 10:01 AM