Owner`s manual

23-EN
Turning Mute Mode On/Off (Int Mute)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to Adapter, Int Mute cannot be set. Refer to
“Setting the Bluetooth Connection (Bluetooth IN)” (page 22).
• When the Bluetooth box is connected, set Int Mute to Off.
Setting Tone Defeat for External Devices (Int Audio)
When inputting external devices to this unit, turning tone defeat on will
bypass Bass Frequency, Treble Frequency, High Pass Filter, i.e., sound
for external devices is output at the default setting.
Setting the Changer Name (CHG Name)
When an optional changer is connected, you can set the displayed mode
name.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHG1 Name/CHG2 Name is
displayed, and the setting can be made respectively.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Versatile Link
Terminal (KCA-410C) to this component.
You can change the AUX name display when AUX IN is set to ON.
When “AUX IN” is set to On, select the “AUX Name” mode by rotating
the Double Action encoder , then press
/ENTER.
After that, rotate the Double Action encoder to select the desired AUX
name, then press
/ENTER.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
SOURCE to select AUX mode and
then press BAND/TA to select your desired device.
Setting the AUX+ Mode
You can input the audio of an external device, (such as a portable audio
player) to the Full Speed™ connector of this unit, using a Full Speed to
Mini-Jack Adapter (KCE-236B).
AUX+ Audio Level Adjustment (AUX+ IN GAIN)
Connecting to an External Amplifier (Power IC)
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
Off.
Setting the Language (Language)
Set the language to be displayed on the unit. Set to “For EU1”/“For
EU2” to use the setting.
Demonstration (Demo)
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
Int Mute On (Initial setting) / Int Mute Off
Int Audio On / Int Audio Off (Initial setting)
CHG (Initial setting) / PMD
AUX IN On / AUX IN Off (Initial setting)
AUX+ On / AUX+ Off (Initial setting)
AUX+ On: Set to On when an external device is connected. If
SOURCE is pressed and Auxiliary+ is selected,
the sound of the external device is input to the unit.
AUX+ Off: Set to Off when an iPod is connected.
High (Initial setting) / Low
High: Increases the external input audio level
Low: Decreases the external input audio level
Power IC On (Initial setting) / Power IC Off
Power IC On: The speakers are driven by the built-in amplifier.
Power IC Off: Use this mode when the front and rear pre-
amplifiers of the unit are used to drive an external
amplifier connected to the speakers. In this
setting, the head unit’s internal amplifier has no
output to drive speakers.
For US / For EU1 (Initial setting) / For EU2 / For Japan / Other
For US: English, French, Spanish
For EU1: Russian, English
For EU2: English, German, French, Spanish, Italian,
Swedish, Portuguese
For Japan: Japanese, English
Other: Chinese (Chinese standard), English
Demo On / Demo Off (Initial setting)
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right