Owner`s manual

12-EN
When an iPod is connected to the iDA-X100M by using the proper
cable, the controls on the iPod are not functional.
The iPod is connected two different ways depending on the iPod model.
The USB connection is designed for the newest iPod models. For older
iPod models, use the FULL SPEED™ connection cable (KCE-422i).
• Only 5th generation iPod and iPod nano can be connected
via a USB device.
• If an iPod is connected via USB, the alphabet skip function
and the artwork screen can be displayed.
• If an iPod is connected via Full Speed™ (KCE-422i), set
AUX+ Setup to OFF. AUX+ cannot be used if an iPod is
connected (refer to
“Setting the AUX+ Mode” on page 23).
• If the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from Bluetooth Box while turning ACC to
OFF.
About iPod usable with this unit
• The unit can be used with the following iPod.
<USB connected>
iPod with video
iPod nano (2nd generation)
iPod nano (1st generation)
<connected via Full Speed™>
iPod with video
iPod with Click Wheel
iPod with colour display
iPod mini
iPod nano (2nd generation)
iPod nano (1st generation)
• If the unit is used with iPod software versions of iTunes later
than 7.4.3.1, correct function and performance are not
guaranteed.
• This unit does not support video playback from iPod.
How to View the Display
<iPod (USB connected) screen display example>
1 Mode display
2 Song title/Episode title/Audiobook title
3 Artist title/Podcast title
4 Album title/Release date
5 Artwork screen
6 Elapsed time
7 Remaining time for playing
8 RDS indicator
<iPod (connected via Full Speed™) screen display example>
1 Mode display
2 Song title/Episode title/Audiobook title
3 Artist title/Podcast title
4 Album title/Release date
5 Elapsed time
6 Remaining time for playing
7 RDS indicator
• Artwork contained in the iPod can be displayed only if connected
through USB.
• When playback time reaches 100 minutes, “00’00” is displayed.
Playback
1 Press SOURCE to switch to the iPod or iPod 2
mode.
2 Press or to select the desired song.
3 To pause playback, press / .
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
iDA-X100M, it will continue playing after the connection.
• Podcasts or audiobooks may have several chapters. The chapters can
be changed by pressing
or .
iPod
FUNC./SETUP
SOURCE
/
/ENTER
Double Action encoder
VIEW
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
2
3
4
5
6
7
1
8
2
3
4
5
6
1
7