Owner`s manual

8-EN
How to View the Display
<Radio screen display example>
1 Mode display
2 Preset number
3Volume
4 Tuning mode
5 Frequency
6 RDS indicator
Listening to Radio
1 Press SOURCE to select TUNER mode.
2 Press BAND/TA repeatedly until the desired radio
band is displayed.
FM-1 FM-2 FM-3 MW LW FM-1
3 Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) Local (Local mode)
Manual (Manual mode) DX (Distance mode)
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Presetting Stations Manually
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press PRESET.
The Preset screen is displayed.
3 Rotate the Double Action encoder to select the
preset number.
4 Press and hold /ENTER for at least 2 seconds.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM-1, FM-2, FM-3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
• Press in the outer ring and rotate the Double Action encoder to the
left or right on the Preset screen, you can switch the Preset screen of
another band.
FM-1 FM-2 FM-3 MW LW FM-1
You can also change the desired radio band by pressing BAND/TA.
Presetting Stations Automatically
1 Press BAND/TA repeatedly until the desired radio
band is displayed.
2 Press and hold TUNE/A.ME for at least 2 seconds.
“Auto Memory” is displayed while the automatic memory is
in progress. The tuner will automatically seek and store 6
strong stations in the selected band. They will be stored 1 to
6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press BAND/TA repeatedly until the desired band is
displayed.
2 Press PRESET.
The Preset screen is displayed.
3 Rotate the Double Action encoder to select a
radio station.
4 Press /ENTER.
The display shows the band, preset number and frequency
of the station selected.
• Press in the outer ring and rotate the Double Action encoder to the
left or right on the Preset screen, you can switch the Preset screen of
another band.
FM-1 FM-2 FM-3 MW LW FM-1
You can also change the desired radio band by pressing BAND/TA.
Radio
TUNE/A.ME
PRESET
/ENTER
SOURCE
Double Action encoder
BAND/TA
4
5
6
3
1
2