Owner`s manual

14-EN
Operating Auxiliary Devices (Optional)
To operate devices connected to the AUX terminals of iLX-700, follow
the procedure described below.
• Turn on the “AUX In”. Refer to “Setting the AUX Mode” (page 27).
• The video will be shield while driving.
1 Press the Home button.
2 Touch [AUX]
*
.
The Auxiliary (AUX) mode screen is displayed.
* The name which is given as the mode name in “Setting the Auxiliary
Name” (page 27) is displayed.
AUX Operation Screen Display During Video File
Playback
Touch the screen.
The AUXiliary (AUX) operation screen is displayed.
Example for AUX main screen
[]
Calls up the Display Setup screen. (see “Display Setup
Operation” on page 21)
• The operation screen changes to the visual screen in the
Auxiliary (AUX) mode for 5 seconds after an operation has
been performed.
Touch the display panel to display the operation screen
again.
[]
Calls up the Audio Setup screen. (see “Audio Setup
Operation” on page 18)
• Setting the AUX name for DVB-T mode displays their individual
operation switches and enables operation. Refer to “Setting the
Auxiliary Name” (page 27).
Operating the Mobile Digital TV
Receiver (DVB-T)
To operate the Mobile Digital TV Receiver (DVB-T) (Optional), set
“Setting the Auxiliary Name” (page 27) to DVB-T.
1 Press the Home button.
The Home screen is displayed.
2 Touch [DVB-T].
The display shows the DVB-T mode screen.
Auxiliary Device
(Optional)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch TV/video while driving the vehicle. The
driver may be distracted from looking ahead and an
accident could occur.
Install the iLX-700 correctly so that the driver cannot
watch TV/video unless the vehicle is stopped and the
emergency brake is applied.
If the iLX-700 is not installed correctly, the driver will
be able to watch TV/video while driving the vehicle
and may be distracted from looking ahead and cause
an accident. The driver or other people could be
severely injured.
Changing to the Mobile Digital TV Receiver
(DVB-T) Mode