Owner`s manual

20-EN

Connect the stand to the monitor cable.

Attach the monitor to the stand as shown in step 1.

Use the cable clamps to fix the cables.

• Before using, check that the monitor and stand assembly is mounted

securely at the chosen mounting location.

• Do not adjust the angle of the monitor with excessive force.

Mounting the Microphone

For the sake of safety, mount the microphone in the following location.

• In a stable and secure location.

• In a location that does not inhibit safely driving the vehicle.

• Mount the microphone in a location where the driver’s voice can

easily be picked up.

Choose a location for the microphone that can easily pick up the drivers

voice. Requiring the driver to move towards the microphone for

audibility causes a distraction that could be dangerous.

Connecting the Cigarette Adapter to the

Cigarette I/F Box

If the cigarette adapter is directly connected:

If the cigarette adapter is connected using the cigarette

adapter extension cable:

• Install the cigarette I/F Box:

Install the cigarette I/F Box in a safe location using the supplied

Velcro Fasteners (2 pieces).

Installing the Stand using Screws fixed

Remove the bottom cover from the stand by turning

it in the direction of the arrow mark.

Attach the bottom cover using the supplied screws.

Attach the stand by turning it to the direction arrow

marks until it locks.

How to remove the Fuse

The fuse (2A) is built into the cigarette adapter.

Cigarette I/F Box

Cigarette Adapter

Extension Cable

Cigarette Adapter

Threaded Types

Cigarette I/F Box

Stand Bottom Side

Bottom Cover

Stand

Remove it by turning

(Threaded Type)

Remove the

projection part.

Remove the fuse.