Owner`s manual

17-EN
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
No function or display.
• Vehicle’s ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle’s ignition off.
•Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
iPod does not play and no sound is output.
• The iPod has not been recognized.
- Reset the iPod. To reset the iPod, refer to the Owner’s Manual
of the iPod.
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“
Connections”).
Make sure the cable is not bent excessively.
• There are no songs in the iPod.
- Download songs to the iPod and connect to this unit.
• Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and this
unit, using the FULL SPEED™ Connection Cable.
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
• The Bluetooth device is not connected.
- Connect the Bluetooth device.
Specifications
BLUETOOTH SECTION
REMOTE CONTROL
GENERAL
CHASSIS SIZE (Monitor section)
CHASSIS SIZE (I/Fbox)
• Due to continuous product improvement, specifications and design
are subject to change without notice.
Information
Basic
iPod
Indication for iPod Mode
Bluetooth mode
Bluetooth Version Bluetooth 1.2 CERTIFIED
Output Power +4 dBm Max. (Power class 2)
HFP (Hands-Free Profile)
HSP (Head Set Profile)
A2DP (Advanced Audio Distribution
Profile)
AV R C P (Audio/Video Remote Control
Profile)
Battery Type CR2025 battery
Width 36 mm (1-7/16")
Height 100 mm (3-15/16")
Depth 12.4 mm (15/32")
Weight 31 g (1.09 oz)
(battery excluded)
Power Requirement 14.4 V DC
(11-16 V allowable)
Maximum Pre-Output Voltage AUX 1200 mV
Width 78.6 mm (3-1/16")
Height 55.7 mm (2-1/4")
Depth 20.2 mm (25/32")
Weight 78 g (2.75 oz) (Monitor)
60 g (2.12 oz) (Stand)
Width 58.7 mm (2-5/16")
Height 27.7 mm (1-1/8")
Depth 85.5 mm (3-3/8")
Weight 72 g (2.54 oz)