Owner`s manual

11-EN
About the Hands-Free Phone
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with the eX-10.
• Avoid answering a hands-free call in heavy traffic or on narrow
streets where driver attention is demanding.
• To enhance call audio, shut the windows to reduce ambient noises.
• Making or receiving calls in noisy locations reduces the audio
quality on both ends of the call.
• Telephone line conditions and other hands-free microphones may
cause voices to sound unnatural.
• Certain mobile phone features are dependent on the capabilities and
setting of your service provider’s network. Additionally, certain
features may not be available due to the different implementation
level of the Bluetooth protocol by the phone manufacturer.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications,as well as
the information contained in the Owner’s Manual are based upon the
latest available information and are believed to be accurate at the
time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Answering a Call
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE No., etc.).
Press .
The call starts.
• When “Setting the Received Calls automatically (Auto Answer)”
(page 14) is set to ON, you can receive a call automatically.
• While calling, iPod or Bluetooth audio temporarily stops. After
calling, playback will resume.
Hanging up the Telephone
Press / .
The call finishes.
• While receiving, you can also hang up by pressing / .
Redial Function
You can redial the person you have previously called.
After finishing a call, press within 5 seconds.
The telephone is redialed.
• If you receive a call from an unknown number, you cannot use the
redial function to call back.
Calling
Call History is recorded for up to the last 10 dialed/received/missed
calls. There are various ways of making calls based on the “Calling.”
The following steps 1 to 5 are common to the various ways of making
these calls. For details, refer to each individual category for making
calls.
1 Press .
The outgoing method list is displayed.
2 Slide the LIST switch in the direction of or
to select the outgoing mode.
3 Press /ENTER .
The outgoing mode is activated, and each mode list is
displayed.
• It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
4 Slide the LIST switch in the direction of or
.
Select a telephone number from the list.
• If sliding the %SKIP switch in the direction of ▲ or ▼, you can
change a page of the list.
Continued
Hands-Free Phone
Control
/ENTER
/
LIST
LIST
% SKIP ▲
% SKIP ▼
Setting items : Dialed List / Received List /Missed List /
Phonebook / Phonebook (SIM)
Dialed List : Dialed history
Received List : Received history
Missed List : Missed incoming history
Phonebook : Mobile phonebook
Phonebook (SIM) : Mobile phonebook stored in SIM card