Owner's Manual

33-EN
Connections
• Connect properly.
Never connect to parts other than the ones indicated in these operating instructions.
• Also refer to the operating instructions of the other products in the system.
• HDMI Output Connector
This connector is used in combination with the video/audio
inputs of another ALPINE product.
• Remote Control Output Lead
This lead is used in combination with an ALPINE main
unit’s remote control input lead.
• Remote Control Input Lead
This lead is used in combination with an ALPINE
main unit’s remote control output lead.
• Ground Lead
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet
metal screw provided.
• Battery Lead
Connect this lead to the positive (+) post of the
vehicle’s battery.
Cable Color
Cable Specifications
Brown
Brown
Black
Yellow
Red
Connect this lead to an open terminal on the
vehicle’s fuse box or another unused power
source which provides (+) 12V only when the
ignition is turned on or in the accessory position.
• Switched Power Lead (Ignition)
• Digital Output Terminal (Optical)
This terminal is used to connect DVE-5300 to ALPINE
digital audio processor (PXA-H800, etc.). These
products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5300.
• Remote Control Eye Jack
Connect the remote control eye to this jack.
To remote control
output lead
Connect to a metal
part of chassis body
with a screw
Ignition Key
Remote Control Eye
(Included)
Fuse
(5A)
REMOTE IN
IGNITION
To remote control
input lead
REMOTE OUT
GND
BATTERY