Owner's Manual

45-EN
Activating your SiriusXM Subscription
After installing your SiriusXM Connect Vehicle Tuner and antenna,
power on your CDE-W265BT/CDE-164BT and select SiriusXM mode. You
should be able to hear the SiriusXM preview channel on Channel 1. If
you cannot hear the preview channels, please check the installation
instructions to make sure your SiriusXM Connect tuner is properly
installed.
After you can hear the Preview channel, tune to Channel 0 to find the
Radio ID of your tuner. In addition, the Radio ID is located on the
bottom of the SiriusXM Connect Vehicle Tuner and its’ packaging. You
will need this number to activate your subscription. Write the number
down for reference.
Note
• The SiriusXM Radio ID does not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call XM customer Care at 1-877-438-9677
As part of the activation process, the SiriusXM satellites will send an
activation message to your tuner. When your radio detects that the
tuner has received the activation message, your radio will display
“SUBSCRIP UPDATED - ANY KEY TO CONTINUE”. Once subscribed, you
can tune to channels in your subscription plan. Note, the activation
process usually takes 10 to 15 minutes, but may take up to an hour. Your
radio will need to be powered on and receiving the SiriusXM signal to
receive the activation message.
Note
• The SiriusXM Satellite Radio controls on this unit are available only
when a SiriusXM Tuner is connected.
1 Press VSOURCE to activate the Satellite Radio (SIRIUS
XM) mode.
2 Press  or  to select the desired channel.
Holding down  or  will rapidly browse through the
channels.
Alternatively, you can enter the number of the desired channel
using the numeric keypad on an optional remote control.
SiriusXM Setting
The following steps 1 to 5 are common to the various SiriusXM
functions. For details, refer to each individual function.
1 Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select “SIRIUS XM”, and then
press ENTER.
The SiriusXM setup mode is activated.
3 Turn the Rotary encoder to select the desired items and
then press ENTER.
SiriusXM:
ALERTSETUP  GAME ALERT  P-LOCK  SIGNAL IND 
TUNE START
*
 ALERTSETUP
* Displayed only when the SiriusXM Tuner-SXV200 or later is
connected.
4 Turn the Rotary encoder to change the settings.
5 Press and hold YSETUP for at least 2 seconds.
The SETUP mode is canceled.
Notes
•Press r to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
The following operations can be performed to change the Alert settings.
The Artist and Song Alerts feature allows you to mark Artists and Songs
from the current channel and then the unit alerts you later when the
marked Artists or Songs are playing on other channels.
 Setting item: ALERTSETUP
Setting contents:
ALERT LIST / ALERT / A S ALERT / DELETE ALL
ALERT LIST
This menu option allows you to enable the Artist/Song alert for
individual Artist/Songs (ALERT ON or OFF) or to delete individual
stored Artist/Song alerts (DELETE).
1Turn the Rotary encoder to select ALERT LIST, and then press
ENTER.
2Turn the Rotary encoder to select a stored Artist or Song,
and then press ENTER.
3Turn the Rotary encoder to ALERT to enable (ALERT ON) or
disable (ALERT OFF) the alert for the selected Artist/Song or
turn the Rotary encoder to select DELETE to delete the
selected Artist/Song from memory.
ALERT
This menu option allows you to temporarily disable the Artist/
Song Alerts for all Artists/Songs. When the Alerts are re-enabled,
individual Artist/Song Alert disabled in the ALERT LIST menu
setting remain disabled.
Turn the Rotary encoder to select ALERT ON or OFF, and
then press ENTER.
If ON is set, the alert for all stored Artists/Songs is enabled.
If OFF is set, the alerts for all stored Artists/Songs are disabled.
A S ALERT
This menu option allows you to enable the alerts of all sources.
Turn the Rotary encoder to select ON or OFF, and then press
ENTER.
If ON is set, the alert of all source is enabled.
If OFF is set, only the alert of SIRIUSXM source is enabled.
DELETE ALL
This operation will delete all alerts (artists, songs and team) stored
in memory.
After selecting this item,
Turn the Rotary encoder to select DELETE ALL YES or NO,
and then press ENTER.
This menu option allows you to select your favorite teams, organized by
leagues, so that you will be alerted later when your favorite teams are
playing on other channels.
 Setting item: GAME ALERT
After selecting GAME ALERT, a sports league list will be displayed.
1Turn the Rotary encoder to select the desired league, and
then press ENTER.
2Turn the Rotary encoder to select a team you want to store,
and then press ENTER.
“TEAM SAVED” and “XXU(sed)/YYE(mpty)” are displayed.
XX is the total number of Artist/Song/GameAlert
™
items stored
in memory, and YY is the total number of memory slots still
available for storage.
Note
• Select “NONE” on the team list if you do not want to store in
memory.
Managing Artist and Song Alerts
Setting the Favorite Sports Team Alerts