Owner's Manual
Table Of Contents
- Quick Reference Guide
- Owners Manual (Supplied on CD-ROM)
- Reset
- Demo Mode
- Table of Contents
- Attaching / Removing Faceplate (CDE-164BT Only)
- Supplied Accessories
- Parts & Controls
- Operating Instructions
- Getting Started
- Radio
- RBDS
- CD/MP3/WMA
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Treble Level/Balance/Fader/Defeat
- Sound Setting
- Equalizer Presets
- Setting BASS ENGINE SQ ON/OFF
- Displaying the BASS ENGINE SQ PARAMETER
- Adjusting the Parametric Equalizer Curve (9BAND P-EQ)
- Setting the Source Volume Level
- Adjusting the Crossover Settings
- Turning Subwoofer ON/OFF
- Setting the Subwoofer Phase
- Setting the Subwoofer System
- Setting the Time Correction Unit (LENGTH)
- Adjusting the Time Correction (TCR)
- External Device
- Setting the Media Xpander mode
- BASS ENGINE SQ Function
- About Time Correction
- About the Crossover
- Other Functions
- SETUP Menu
- BT Hands Free Calling
- Setup Before Using
- Bluetooth SETUP
- Setting the Bluetooth Connection (BT IN)
- Setting the Auto Pairing with iPod/iPhone
- Setting the Bluetooth Device
- Setting the Visible Mode
- Setting the Bluetooth sound quality
- Setting the caller information display ON/OFF
- Setting the Phone Book Update
- Changing the Phone book List Order
- Selecting the output speaker
- Displaying the firmware version
- Updating the firmware
- Hands-Free Phone Control
- About the Hands-Free Phone
- Answering a Call
- Hanging up the Telephone
- Calling
- Voice Control Operation
- Call waiting function
- Preset a number in the Phone Menu (Shortcut dial)
- Dialing the preset number
- Adjusting the volume when receiving a Call
- Muting the microphone input quickly (Voice Mute)
- Call Switching Operation
- Bluetooth Audio Operation
- Flash Memory
- iPod/iPhone
- Pandora internet radio
- SiriusXM Satellite Radio Operation (Tuner Required)
- Receiving Channels with the SiriusXM Tuner
- SiriusXM Setting
- Checking the SiriusXM Radio ID Number
- Storing Channel Presets
- Tuning Channels using Presets
- SmartFavorites Functions
- Storing the desired Artist and Song Alerts
- Receiving and Tuning to an Alert
- Search Function
- Using Jump Memory and Jump Recall function
- Replay Function
- Parental Lock Function
- iTunes radio tagging
- Changing the Display
- Information
- Installation and Connections
- Troubleshooting
- Messages
- Specs
- Scan of CD-ROM
- Warranty
39-EN
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80 GB, 160 GB): Ver.1.1.2
• The following devices have been certified following Made for iPhone
guidelines. Correct function of earlier versions cannot be guaranteed.
iPhone 5s: Ver.7.1.1
iPhone 5c: Ver.7.1.1
iPhone 5: Ver.7.1.1
iPhone 4s: Ver.7.1.1
iPhone 4: Ver.7.1.1
iPhone 3GS: Ver.6.1.6
iPhone 3G: Ver.4.2.1
iPhone: Ver.3.1.3
• For clarity in identifying your model of iPod, please see Apple’s own
document “Identifying iPod models” at
http://support.apple.com/kb/HT1353
• This unit does not support video playback from iPod/iPhone, even
using a video-compatible cable.
Setting the iPod Control
When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
Press and hold /ENTER/OPTION for at least 2 seconds
during iPod source.
The Option menu for iPod mode is activated.
2
Turn the Rotary encoder to select APP DIRECT, and then
press ENTER.
The iPod control mode will be switched between iPod MODE
and HU MODE.
HU (HEAD UNIT) MODE:
Operate the iPod/iPhone via this unit.
This mode allows you to use M.I.X. play, repeat and music search in
an iPod/iPhone from the head unit.
Note
• In HU MODE, if you operate from an iPod/iPhone, the head unit’s
display and operations may not correspond with those of the iPod/
iPhone.
iPod MODE:
Operate the iPod/iPhone using its own controls. When iPod MODE
is selected, some functions will not be operable via the head unit.
Notes
• During HU MODE, you can switch to iPod MODE directly by pressing
OBAND.
• Once the control mode is changed, the iPod/iPhone is paused. Press
to continue.
Playback
1
Press VSOURCE to switch to the iPod source.
2
Press or to select the desired song.
Pressing and holding or will fast backward/fast
forward the current track.
3
To pause playback, press .
Pressing again will resume playback.
Notes
• A song playing on the iPod/iPhone while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected Podcast or Audiobook, the
episode can be changed by pressing or .
• An episode may have several chapters. The chapter can be changed by
pressing or .
Searching for a desired Song
An iPod/iPhone can contain hundreds of songs. Use one of the search
modes listed below, that you deem most effective in finding a desired
song.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook/Genius Mix
List search mode to narrow searches based on the table below.
For example:
Searching by Artist name
The following example explains how an ARTIST search is performed.
Selecting another search category operates in the same manner but
using a different hierarchy.
1
Press ENTER to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST search
mode, and then press ENTER.
SHUFFLEALL
*1
PLAYLIST ARTIST ALBUM SONG
PODCAST GENRE COMPOSER AUDIOBOOK
GENIUS MIX
*2/*3
SHUFFLEALL
*1 Refer to “Random Play Shuffle (M.I.X.)” on page 41.
*2 Depending on the connected iPod/iPhone, Genius Mix function
may not be supported.
*3 When an iPod/iPhone with Genius Mix List created by iTunes is
connected to this unit, GENIUS MIX search mode can be used
to search a Genius Mix List.
Note
• The display of search mode list varies depending on the setting of iPod
LIST. For details, refer to “iPod/iPhone Search Mode Setting” on
page 29.
3
Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
4
Turn the Rotary encoder to select the desired Album, and
then press ENTER.
5
Turn the Rotary encoder to select the desired Song, and
then press ENTER.
Notes
• This function is unavailable when iPod MODE is selected in “Setting
the iPod Control” (refer to “Setting the iPod Control” on page 39). And
“iPod CONTROL” will be displayed.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlist Song — —
Artist
*
Album
*
Song —
Album
*
Song — —
Song———
Podcast Episode — —
Genre
*
Artist
*
Album
*
Song
Composer
*
Album
*
Song —
Audiobook — — —
Genius Mix List———