Owner's Manual

27-EN
 CDE-W265BT
 CDE-164BT
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
AUDIO
*1
 GENERAL  DISPLAY  TUNER  SIRIUS XM
*2

IPOD  APP  BLUETOOTH
*3
 AUDIO
(e.g. Select GENERAL)
GENERAL:
CLOCK MODE CLOCK ADJ
*4
 PWR CLOCK  AUX SETUP 
AUX NAME
*5
 INT MUTE  PLAY MODE  STAY ON  DEMO
MODE  CLOCK MODE
DISPLAY:
ILLUMINATI  DIMMER  TEXTSCROLL  SCROLLTYPE 
ILLUMINATI
TUNER:
TUNER FREQ  FM SET  TUNER FREQ
IPOD:
IPOD LIST
APP:
ALPINE APP  TTS VOLUME  ALPINE APP
*1 Refer to “Sound Setting” on page 17.
*2 Refer to “SiriusXM Setting” on page 45.
*3 Refer to “Bluetooth SETUP” on page 31.
*4 Refer to “Setting Time” on page 10.
*5 Displayed only when AUX SETUP is set to ON.
3 Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
5 Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
•Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
GENERAL is selected on the setup main menu in step 2.
Setting the Clock Display (CLOCK MODE)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: CLOCK MODE
Setting contents:
12H (Initial setting) / 24H
Turning the Clock Display ON/OFF
 Setting item: PWR CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
The clock isn’t displayed when the power is off.
ON:
The clock is displayed when the power is off.
Setting the AUX SETUP mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
ON:
Set to ON when a portable device is connected. If VSOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
/SOURCE


/SETUP
/ENTER

DIM.
6
Rotary encoder
/SOURCE

/SETUP
/ENTER
DIM.


6
Rotary encoder
General Setting