Owner's Manual
Table Of Contents
- Quick Reference Guide
- Owners Manual (Supplied on CD-ROM)
- Reset
- Demo Mode
- Table of Contents
- Attaching / Removing Faceplate (CDE-164BT Only)
- Supplied Accessories
- Parts & Controls
- Operating Instructions
- Getting Started
- Radio
- RBDS
- CD/MP3/WMA
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Treble Level/Balance/Fader/Defeat
- Sound Setting
- Equalizer Presets
- Setting BASS ENGINE SQ ON/OFF
- Displaying the BASS ENGINE SQ PARAMETER
- Adjusting the Parametric Equalizer Curve (9BAND P-EQ)
- Setting the Source Volume Level
- Adjusting the Crossover Settings
- Turning Subwoofer ON/OFF
- Setting the Subwoofer Phase
- Setting the Subwoofer System
- Setting the Time Correction Unit (LENGTH)
- Adjusting the Time Correction (TCR)
- External Device
- Setting the Media Xpander mode
- BASS ENGINE SQ Function
- About Time Correction
- About the Crossover
- Other Functions
- SETUP Menu
- BT Hands Free Calling
- Setup Before Using
- Bluetooth SETUP
- Setting the Bluetooth Connection (BT IN)
- Setting the Auto Pairing with iPod/iPhone
- Setting the Bluetooth Device
- Setting the Visible Mode
- Setting the Bluetooth sound quality
- Setting the caller information display ON/OFF
- Setting the Phone Book Update
- Changing the Phone book List Order
- Selecting the output speaker
- Displaying the firmware version
- Updating the firmware
- Hands-Free Phone Control
- About the Hands-Free Phone
- Answering a Call
- Hanging up the Telephone
- Calling
- Voice Control Operation
- Call waiting function
- Preset a number in the Phone Menu (Shortcut dial)
- Dialing the preset number
- Adjusting the volume when receiving a Call
- Muting the microphone input quickly (Voice Mute)
- Call Switching Operation
- Bluetooth Audio Operation
- Flash Memory
- iPod/iPhone
- Pandora internet radio
- SiriusXM Satellite Radio Operation (Tuner Required)
- Receiving Channels with the SiriusXM Tuner
- SiriusXM Setting
- Checking the SiriusXM Radio ID Number
- Storing Channel Presets
- Tuning Channels using Presets
- SmartFavorites Functions
- Storing the desired Artist and Song Alerts
- Receiving and Tuning to an Alert
- Search Function
- Using Jump Memory and Jump Recall function
- Replay Function
- Parental Lock Function
- iTunes radio tagging
- Changing the Display
- Information
- Installation and Connections
- Troubleshooting
- Messages
- Specs
- Scan of CD-ROM
- Warranty
10-EN
Notes
• Before attaching the front panel, make sure that there is no dirt or dust
on the connector terminals and no foreign object between the front
panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
CDE-W265BT
CDE-164BT
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Setting the Dimmer Control
Press and hold DIM. for at least 2 seconds repeatedly to
select the DIMMER mode.
DIMMER AUTO DIMMER ON DIMMER OFF DIMMER AUTO
DIMMER AUTO mode:
Decrease the illumination brightness of the unit’s buttons with the
head lights of the vehicle ON. This mode decreases the unit’s
backlighting in sync with headlight usage.
DIMMER ON mode:
Keep the illumination brightness of the backlighting dimmed.
DIMMER OFF mode:
Keep the illumination brightness of the backlighting bright.
Note
• The setting items are the same as DISPLAY setting in SETUP mode.
For details, refer to “Dimmer Control” on page 29.
Setting Time
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select GENERAL, and then
press ENTER.
3
Turn the Rotary encoder to select the CLOCK ADJ mode,
and then press ENTER.
The time indication will blink.
4
Turn the Rotary encoder to adjust the hours while the
time indication is blinking.
5
When the hour has been adjusted, press ENTER.
6
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
7
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
•Pressing t will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Attaching
RESET switch
RESET switch