Owner`s manual
Playback
1 Press
SOURCE/<!>
to
switch
to
the
iPod mode.
TUNER
~
DISC
~
USB AUDIO
~
iPod*I/AUX+*2
~
BT
AUDIO*3
~
AUX*4
~
TUNER
*1 Displayed only when the iPhoneliPod is connected
and
AUX+
SETUP is
s'et
to OFF, refer to "Setting the AUX+ SETUP Mode"
(paKe
17)
.
•2 Displayed only when the AUX
+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 17).
•3 Displayed only when
BT
IN is set
to
BT
ADAPTER. Refer to
"Bluetooth SettinK" (page
16).
.4
Refer
to
"Using the Front AUX Input Terminal" (page
15).
2 Press
l-4<1li
or
~
to
select
the desired
song.
Return to the
beginning
of
the
current
song:
Press
l-4<1li.
Fast backward
through
current
song:
Press
and hold
l-4<1li.
Advance
to
the
beginning
of
the
next
song:
Press
~.
Fast
forward
through
current
song:
Press
and hold
~.
3
To
pause playback,
press
~/II/ENT.
Pressing
~/II
lENT
again will resume playback.
• A song playing on the iPhoneliPod while it is connected to this unit
wiJl
cominue to play from where it was paused after disconnection.
•
If
you listen to an episode from a selected podcast
or
audiobook, the
episode can be changed by pressing 1
~
or
~
2.
• An episode may have several chapters, the chapter can be changed
by pressing
l-4<1li
or
~.
Searching
for
a
desired
Song
An
iPhone/iPod can contain hundreds
of
songs. By using file tag
information and keeping these songs organized
in
playlists, this unit's
search functions will ease song searches.
Each music catt:gory has its own individual hierarchy. Use the Playlistl
ArtistlAlbum/Song/PodcastiGenre/ComposerlAudiobook search mode
to narrow searches based on the table below.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlist
Song
- -
Artist'
Album'
Song
-
Album'
Song
- -
Song
- -
-
Podcast Episode
- -
Genre*
Artist'
Album'
Song
Composer'
Album'
Song
-
Audiobook
-
-
-
For example: Searching by Artist name
The following example explains how an ARTIST search
is
performed.
Another search mode can
be used for the same operation, although the
hierarchy differs.
1 Press
~IESC
to
activate the search selection mode.
The
..
~
..
indicator lights up.
2 Turn
the
Rotary
encoder
to
select the ARTIST
search mode,
and
then
press
~/II/ENT.
PLAYLIST H ARTIST H ALBUM H SONG H PODCAST
H GENRE H COMPOSER H
AUDIOBOOK
H PLAYLIST
3 Turn
the
Rotary
encoder
to
select the
desired
Artist,
and
then
press
~/II/ENT.
4 Turn
the
Rotary
encoder
to
select the
desired
Album, and
then
press
~III
lENT.
5 Turn the
Rotary
encoder
to
select
the
desired
Song, and then press
~/II/ENT.
o Afier pressing and holding
~/II
lENT
for
at least 2 seconds while
in
each hierarchy (except SONG and AUDIOBOOK hierarchy),
aJl
sanKs
of
the selected hierarchy are played back.
o After selecting {ALLf
in
the search mode
with"''',
press
and
hold
~/IIIENT
for at least 2 seconds
to
play back a// songs
in
the
iPhoneliPod or selected search mode.
o While
in
the search mode,
if
you press and hold
~IESC
for
2 seconds, or no operation is
petjormedfor
10
seconds, the search
mode is canceled.
•
In
the search mode, pressing ::!::JIMUTE
wiJ/
return to the previous
mode.
• When search is made during M.l.X. play, the M.I.X. play mode
wiJl
be
canceled.
•
"NO
SONG"
wiJl
be displayed
if
there are no songs
in
the selected
play/ist in the PLAYLIST search mode.
• "NO PODCAST" will be displayed
if
there is no podcast data in the
iPhoneliPod
in
the PODCAST search mode.
o "NOAUDIOBOK"
wiJl
be displayed
if
there is no audiobook dara
in
the iPhoneliPod
in
the AUDIOBOOK search mode.
•
If
"iPod
name"
stored in the iPhoneliPod is selected
in
the desired
Playlist search mode. and
~/IIIENT
is
pressed, you can search
for
aJl
songs
in
the iPhoneliPod. Also,
if
you press and hold
~/II
lENT
jor
at least 2 seconds. all songs
in
the iPhoneliPod are played back.
• Depending on the iPhoneliPod, podcast search is not supported.
•
If
anyone
of
the preset bultons
(1
through 6) is pressed
in
the search
mode, a search can be made quickly by skipping to the specified
location.
For
details, refer to "Direct Search Function" on page 20.
Quick
Search
You
can search a song from all songs
in
the iPhone/iPod without
selecting an album, artist, etc.
1 Press
and
hold
~/ESC
for
at least 2
seconds
to
activate the
Quick
Search mode.
The
,,~
..
indicator lights up.
2 Turn the
Rotary
encoder
to
select a
desired
song.
The selected song is played
back
immediately.
• Press and hold
~/ESC
for at least 2 seconds
in
the search mode to
cancel.
Or.
the search mode is canceled
ifno
operation is performed
jor
10 seconds.
o
If
many songs are
in
the iPhoneliPod, it rakes time to
searchjor
sOllgs.
•
If
anyone
of
the preset bultons
(1
through
6)
is
pressed
in
the search
mode, a sean·h can be lIlade quickly by skipping
to the specijied
location.
For
derails, refer
to
"Direct Search Function" on page 20.
o This/unction is inactive during repeat
(~)
playback.
19-EN