Owner`s manual

The speakers are driven by the built-in
amplifier.
=
I
SOURCEI<!> ~III/ENT
Rear
right
Front
right
Speakers
e
e
SPEAKER
RIGHT REAR
SPEAKER
RIGHT FRONT
POW ON :
SPEAKER
LEFT REAR
e
Rear
left
Controlling USB memory (Optional)
• No sound is produced by the system when the power output is set to
OFF.
Setting the AUX+ SETUP Mode
AUX+ ON I AUX+ OFF (Initial setting)
SPEAKER
LEFT FRONT
e
Front
left
A USB memory device may be connected to this unit. With USB
memory connected, playback
of files on the device is controlled from
this unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
An external device (such as a portable music player) can be connected
to the Full Speed connector
of this unit. A conversion cable
(KCE-237B) for building up the AUX
IN (optional) is required.
A portable mu,ic device and
an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/<!> is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set
to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ SETUP is set to
ON. Press
~ III lENT when AUX+ SETUP is set to ON, and select
AUX+ NAME
by turning the Rotary encoder, then press ~ III lENT.
After that, turn the
Rotary encoder to select the desired AUX+ name.
Setting the AUX NAME mode
AUXILlARY*"(Initial setting) I TV I DVD I PORTABLE*2 I GAME
You can change the AUX NAME display in the SETUP mode.
*1 Ajier the serting is completed, AUX is displayed on the unit.
*2 After the serring is completed, PMD is displayed on the unit.
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
1 Press SOURCE/<!> to switch to the USB AUDIO
mode.
The mode will change every time the button is pressed.
TUNER
~ DISC ~ USB AUDIO ~ iPod*t / AUX+*2 ~
BT AUDIO*] ~ AUX*4 ~ TUNER
*1 Displayed only when the iPhoneliPod is connecred and AUX +
SETUP is set to OFF. refer
to "Setting the AUX+ SETUP Mode"
(page
17).
*2 Displayed only when the AUX+ SETUP is set to ON. refer to "Setting
the AUX+ SETUP Mode" (page
17).
*3 Only when BT IN is set ro ADAPTER. refer to "Setting the Bluetooth
Connection
(BT IN)" (page 16).
*4 Refer to "Using the Front AUX Inplll Terminal" (page 15).
2 To pause playback, press ~ III lENT .
Pressing ~ /II lENT again will resume the playback.
• The root folder is displayed liS "ROOT" in the Folder NlIme Search
mode.
• When
II search is made in the USB mode. any song being played back
will be stopped.
• This unit plays backftles on a USB memory device with the same
controls and modes as playback
of CDs containing MP3IWMAlAAC.
For details, refer to "CDIMP3IWMAlAAC" on pages 8to I I.
• Before disconnecting USB memory, be sure to change to another
source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recordedjile is played back.
17-EN