Owner`s manual
Setting
Time
Radio
=
0
c::J
fI::7
a
))
[I
II[@
~
1\
. . ..
.,n@
I
I
1 Press and hold
SOUND/SETUP
for at least
2 seconds to activate the SETUP mode.
2 Turn the
Rotary
encoder
to select the CLOCK ADJ
mode, and then press
~/II/ENT.
The time indication will blink,
3 Turn the
Rotary
encoder
to adjust the hours while
the time indication
is
blinking.
4 When the hour has been adjusted, press
~/II/ENT.
5 Turn the
Rotary
encoder
to adjust the minutes
while the time indication is blinking.
6 Press and hold
SOUND/SETUP
for at least 2
seconds to return to normal mode.
SOURCE/<!>
BAND
141IIII
~
TUNE/A.ME
Listening
to
Radio
Preset buttons
(1
through 6)
•
To
synchronize the clock to another clock/watch
or
radio time
announcement. pren' and hold
~/IIIENT
for
at least 2 seconds
ajier setting the "hour." Minutes will reset
to
"00", I{the display
shows over
"30"
minutes when you do this, the time will advance one
hour.
• Pren'ing
:::!::JIM
UTE
will return to the previous mode.
•
Ifno
operation is
performedfor
60 seconds, the unit will return to
normal mode automatically.
1 Press SOURCE/<!> to select TUNER mode.
2 Press
BAND
repeatedly until the desired radio band
is displayed.
F1
(FM1)
~
F2
(FM2)
~
AM
~
F1
(FM1)
3 Press
TUNE/A.ME
to select the tuning mode.
ox
SEEK
(Distance mode)
~
SEEK
(Local mode)
~
OFF
(Manual mode)
~
OX
SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned
in
(Automatic Seek Tuning).
Local
mode:
Only strong stations will be automatically tuned
in
(Automatic
Seek Tuning).
Manual mode:
The
frequency
is
manually tuned
in
steps (Manual tuning).
4 Press
141IIII
or
~
to tune
in
the desired station.
Holding down
141IIII
or
~
will change the frequency
continuously.
Presetting
Stations
Manually
1 Select the radio band and tune
in
a desired radio
station you wish to store
in
the preset memory.
2 Press and hold, for at least 2 seconds,
anyone
of the
preset
buttons
(1
through
6)
into which you wish
to store the station.
The selected station is stored.
The
display
shows the band, preset
number
and
station
frequency
memorized,
• A total
of
/8
stations can be stored
in
the preset memory (6 stations
j(,reach
band; FMI, FM2 und AM).
• I{you store a station
in
a preset memory which a/ready hus a station,
the current station will be cleared and replaced with the new station.
7-EN