Owner`s manual
22-EN
01GB05CDA9887.fm
ALPINE CDA-9887 68-08564Z20-A (EN)
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Audio Setting, Display Setting, etc., can
be modified.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Rotary encoder to select the desired
item, and then press / /ENT.
Bluetooth
*
1
GENERAL
AUDIO
DISPLAY
TUNER
*
Bluetooth
*
1
(e.g. Select AUDIO)
* Only when HD Radio/SAT Radio is connected.
3
Turn the Rotary encoder to select a setting item,
and then press / /ENT.
(e.g. Select Subwoofer)
Bluetooth
*
1
Bluetooth IN
GENERAL:
Birthday Set Clock Mode Clock Clock Adjust
*
2
Play Mode Beep INT Mute
*
3
AUX IN
AUX Name
*
4
Changer Name Digital AUX
Power IC Language Set Demo Birthday Set
AUDIO:
Subwoofer SUBW. System
*
5
Factory’s EQ
*
6
T.CORR Parameter
*
7
Filter Type SUBW. Phase
SUBW. Channel TW Setup
*
8
EQ Mode
*
9
Subwoofer
DISPLAY:
Illumination Dimmer Scroll Type Text Scroll Font
Select BGV Select Calendar Opening MSG
Illumination
TUNER
*
10
:
Only when XM is connected.
XM ADF
Only when SIRIUS is connected.
Game Alert
Only when HD Radio is connected.
Digital Seek Station Call Digital Seek
*
1
Displayed only when INT Mute is OFF.
*
2
Refer to “Setting the Time and Calendar” (page 7).
*
3
Displayed only when Bluetooth IN is OFF.
*
4
Displayed only when AUX IN is ON.
*
5
Displayed only when Subwoofer is ON, and no external audio
processor is connected.
*
6
Refer to “Equalizer Presets” (page 13).
*
7
Refer to “Setting the Time Correction Unit” (page 18).
*
8
Displayed only when 2.2ch (3WAY) is set.
*
9
Refer to “Setting EQ mode” (page 14).
*
10
When SAT/HD Radio is connected.
For the SAT Radio Setting, refer to “SAT Radio Receiver (Optional)”
(page 25).
*
11
These items cannot be adjusted when MultEQ (page 13) is set to ON.
4
Turn the Rotary encoder to change the setting,
and then press / /ENT.
(e.g. Select Subwoofer ON or Subwoofer OFF.)
5
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Pressing /RTN returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
Select Bluetooth from the setup main menu in step 2 above.
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box.
Setting the Bluetooth IN Connection
Set ADAPTER when the Bluetooth Box is connected.
GENERAL is selected on the setup main menu in step 2.
Birthday Opening Message Setting (Birthday Set)
While Opening MSG is set to ON (refer to “Opening Message ON/OFF
Setting” on page 25), and then input your birthday details, a message
can be displayed on that day. Turn the Rotary encoder to set “mm”
(Month), then press //ENT. Turn the Rotary encoder again to set
“dd” (Date).
Setting the Clock Display (Clock Mode)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Turning the Clock Display ON/OFF (Clock)
When ON is set, the time always appears in the lower left of the display.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
//ENT
Rotary encoder
SOURCE/
FUNC./SETUP
/RTN
BAND
Bluetooth Setting
Bluetooth IN ADAPTER / Bluetooth IN OFF (Initial
Setting)
General Setting
mm/dd
AM (Before noon) 12:00 (12-hour) (Initial setting) /
00:00 (24-hour)
Clock ON (Initial Setting) / Clock OFF
*
11
68-08564Z20-A_F.book Page 22 Thursday, March 15, 2007 3:36 PM