Electronics Car Stereo System User's Manual
Table Of Contents
- Operating Instructions
- WARNING
- Getting Started
- Radio
- RDS
- Setting RDS Reception Mode and Receiving RDS Stations
- Recalling Preset RDS Stations
- Receiving RDS Regional (Local) Stations
- PI SEEK Setting
- Setting PTY31 (Emergency Broadcast) reception
- Setting the Time to automatically Adjust
- Receiving Traffic Information
- PTY (Programme Type) Tuning
- Receiving Traffic Information While Playing CD or Radio
- Priority News
- Displaying Radio Text
- CD/MP3/WMA/AAC
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Auto Volume/Defeat
- Setting the Subwoofer Level
- Setting the Bass Control
- Setting the Treble Control
- Adjusting the High Pass Filter
- Blackout Mode On and Off
- Turning Loudness On/Off
- Turning Subwoofer ON/OFF
- Setting the Subwoofer System
- Other Functions
- SETUP
- Bluetooth Setting
- General Setting
- Birthday Opening Message Setting (Birthday Set)
- Setting the Clock Display (Clock Mode)
- Setting of Calendar Display Pattern Switching (Calendar)
- Playing MP3/WMA/AAC Data (Play Mode)
- Sound (Beep) Guide Function
- Turning Mute Mode On/Off (INT Mute)
- Setting the AUX+ Setup Mode
- Setting the AUX+ Level (AUX IN GAIN)
- Setting the External Digital Input
- Setting the AUX Mode (V-Link)
- Connecting to an External Amplifier
- Setting the Language Font
- Demonstration
- Setting Adaptive Steering Remote Control
- Display Setting
- USB memory (Optional)
- iPod® (Optional)
- IMPRINT Operation (Optional)
- Changing MultEQ mode
- Adjusting Subwoofer Level/Bass Level/Treble Level/Fader (Between Front and Rear)/Balance (Between Left and Right)/Black Out in MultEQ mode
- Adjusting Sound Setting in Manual Mode
- Turning Subwoofer ON/OFF
- Setting the Subwoofer System
- Setting the Subwoofer Phase
- Setting the Subwoofer Channel (SUBW. Channel)
- Equalizer Presets (Factory’s EQ)
- Setting the Response Slope for the High Range Speaker (TW Setup)
- Setting the Filter type
- Turning Media Xpander ON/OFF
- Setting the MX Level
- Setting EQ mode
- Setting the Time Correction Unit (TCR Parameter)
- Blackout Mode On and Off
- Sound Field Adjustment
- About Time Correction
- About the Crossover
- About IMPRINT
- Changer (Optional)
- Remote Control
- Information
- Installation and Connections
45-EN
<JAPANESE CAR>
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
Remove USB memory
Pull out USB memory squarely from the USB cable.
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognised even when
USB memory is connected, remove USB memory once, and then
connect it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• Route the USB cable away from another cables, etc.
Front Frame
Screws (M5 × 8)
(Included)
This unit
Mounting Bracket
Cable (sold separately)
USB memory
(sold separately)
This unit
USB connector
This unit
USB connector
Cable (sold separately)
USB memory
(sold separately)