Electronics Car Stereo System User's Manual
Table Of Contents
- Operating Instructions
- WARNING
- Getting Started
- Radio
- RDS
- Setting RDS Reception Mode and Receiving RDS Stations
- Recalling Preset RDS Stations
- Receiving RDS Regional (Local) Stations
- PI SEEK Setting
- Setting PTY31 (Emergency Broadcast) reception
- Setting the Time to automatically Adjust
- Receiving Traffic Information
- PTY (Programme Type) Tuning
- Receiving Traffic Information While Playing CD or Radio
- Priority News
- Displaying Radio Text
- CD/MP3/WMA/AAC
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Auto Volume/Defeat
- Setting the Subwoofer Level
- Setting the Bass Control
- Setting the Treble Control
- Adjusting the High Pass Filter
- Blackout Mode On and Off
- Turning Loudness On/Off
- Turning Subwoofer ON/OFF
- Setting the Subwoofer System
- Other Functions
- SETUP
- Bluetooth Setting
- General Setting
- Birthday Opening Message Setting (Birthday Set)
- Setting the Clock Display (Clock Mode)
- Setting of Calendar Display Pattern Switching (Calendar)
- Playing MP3/WMA/AAC Data (Play Mode)
- Sound (Beep) Guide Function
- Turning Mute Mode On/Off (INT Mute)
- Setting the AUX+ Setup Mode
- Setting the AUX+ Level (AUX IN GAIN)
- Setting the External Digital Input
- Setting the AUX Mode (V-Link)
- Connecting to an External Amplifier
- Setting the Language Font
- Demonstration
- Setting Adaptive Steering Remote Control
- Display Setting
- USB memory (Optional)
- iPod® (Optional)
- IMPRINT Operation (Optional)
- Changing MultEQ mode
- Adjusting Subwoofer Level/Bass Level/Treble Level/Fader (Between Front and Rear)/Balance (Between Left and Right)/Black Out in MultEQ mode
- Adjusting Sound Setting in Manual Mode
- Turning Subwoofer ON/OFF
- Setting the Subwoofer System
- Setting the Subwoofer Phase
- Setting the Subwoofer Channel (SUBW. Channel)
- Equalizer Presets (Factory’s EQ)
- Setting the Response Slope for the High Range Speaker (TW Setup)
- Setting the Filter type
- Turning Media Xpander ON/OFF
- Setting the MX Level
- Setting EQ mode
- Setting the Time Correction Unit (TCR Parameter)
- Blackout Mode On and Off
- Sound Field Adjustment
- About Time Correction
- About the Crossover
- About IMPRINT
- Changer (Optional)
- Remote Control
- Information
- Installation and Connections
41-EN
• Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
USB memory is a malfunction or it is shorted.
- Connect another USB memory.
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
Indication for USB memory
Error
Device Error
No USB Unit
NO FILE