Electronics Car Stereo System User's Manual
Table Of Contents
- Operating Instructions
- WARNING
- Getting Started
- Radio
- RDS
- Setting RDS Reception Mode and Receiving RDS Stations
- Recalling Preset RDS Stations
- Receiving RDS Regional (Local) Stations
- PI SEEK Setting
- Setting PTY31 (Emergency Broadcast) reception
- Setting the Time to automatically Adjust
- Receiving Traffic Information
- PTY (Programme Type) Tuning
- Receiving Traffic Information While Playing CD or Radio
- Priority News
- Displaying Radio Text
- CD/MP3/WMA/AAC
- Sound Setting
- Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Auto Volume/Defeat
- Setting the Subwoofer Level
- Setting the Bass Control
- Setting the Treble Control
- Adjusting the High Pass Filter
- Blackout Mode On and Off
- Turning Loudness On/Off
- Turning Subwoofer ON/OFF
- Setting the Subwoofer System
- Other Functions
- SETUP
- Bluetooth Setting
- General Setting
- Birthday Opening Message Setting (Birthday Set)
- Setting the Clock Display (Clock Mode)
- Setting of Calendar Display Pattern Switching (Calendar)
- Playing MP3/WMA/AAC Data (Play Mode)
- Sound (Beep) Guide Function
- Turning Mute Mode On/Off (INT Mute)
- Setting the AUX+ Setup Mode
- Setting the AUX+ Level (AUX IN GAIN)
- Setting the External Digital Input
- Setting the AUX Mode (V-Link)
- Connecting to an External Amplifier
- Setting the Language Font
- Demonstration
- Setting Adaptive Steering Remote Control
- Display Setting
- USB memory (Optional)
- iPod® (Optional)
- IMPRINT Operation (Optional)
- Changing MultEQ mode
- Adjusting Subwoofer Level/Bass Level/Treble Level/Fader (Between Front and Rear)/Balance (Between Left and Right)/Black Out in MultEQ mode
- Adjusting Sound Setting in Manual Mode
- Turning Subwoofer ON/OFF
- Setting the Subwoofer System
- Setting the Subwoofer Phase
- Setting the Subwoofer Channel (SUBW. Channel)
- Equalizer Presets (Factory’s EQ)
- Setting the Response Slope for the High Range Speaker (TW Setup)
- Setting the Filter type
- Turning Media Xpander ON/OFF
- Setting the MX Level
- Setting EQ mode
- Setting the Time Correction Unit (TCR Parameter)
- Blackout Mode On and Off
- Sound Field Adjustment
- About Time Correction
- About the Crossover
- About IMPRINT
- Changer (Optional)
- Remote Control
- Information
- Installation and Connections
36-EN
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the
KCA-410C (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See “Multi-Changer Selection (Optional)” on page 36 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press SOURCE/ to activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press BAND/TA to switch the Disc mode in the Changer mode.
2
Press F/SETUP to activate Disc Select mode.
3
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and
CD/MP3 playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit. For details, please see the CD/MP3/
WMA/AAC section.
* When a 12-disc CD changer is connected.
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press SOURCE/ to switch to the MP3 Changer
mode.
2
Press any one of the disc select buttons
(1 through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press / .
Pressing / again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA/AAC”
pages 12 to 15.
Multi-Changer Selection (Optional)
Alpine’s Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press SOURCE/ on this unit to activate the CD
Changer mode.
Alternatively, press SOURCE on the remote control
(RUE-4202) to activate the CD Changer mode.
2
Press BAND/TA on this unit or the RUE-4202 to
activate the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3
Press BAND/TA until the desired CD Changer
indicator appears on the display.
Alternatively press BAND on the Remote Control until the
desired changer indicator appears on the display.
• If the selected CD Changer is not connected, the display will show
“NO CHANGER (No.)”.
• To operate the selected changer, see “CD/MP3/WMA/AAC”
(
pages 12 to 15).
• For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 22.
Changer (Optional)
F/SETUP
/
BAND/TA
SOURCE/
Select buttons
(1 through 6)
Disc Select Mode
(Disc No.1~6)
Disc Select Mode *
(Disc No.7~12)
RPT/M.I.X. Mode
Disc Select Mode
(Disc No.1~6)
SOURCE
BAND