Electronics Car Stereo System User's Manual

11-EN
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1
minute, the “TA” indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. The “EON” indicator lights up while an RDS EON
station is being received. If the station being received does not
broadcast the traffic information, the receiver automatically tunes in
the related station that broadcasts the traffic information when it
occurs.
3 Press and hold BAND/TA for at least 2 seconds to
deactivate the Traffic Information mode.
The “TA” indicator goes out.
Priority News
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1 Press F/SETUP to activate the function mode while
the unit is in Radio (FM receiving) mode.
2 Press NEWS 2 to activate the PRIORITY NEWS
mode.
The “NEWS” indicator appears in the display.
To disable the PRIORITY NEWS function, press NEWS 2.
• In the PRIORITY NEWS function, unlike in the TA function, the
volume does not increase automatically.
3 Press F/SETUP to activate the preset mode, while
the unit is in Radio (FM receiving) mode.
• Operate the unit while the function mode is activated. If no operation
is performed for 5 seconds, the function mode is cancelled.
Displaying Radio Text
Text messages from a radio station can be displayed.
Press VIEW while receiving FM in the radio mode to
select the Radio Text display.
The display will change every time the button is pressed.
If there is PS (Programme Service Name)
* Press and hold VIEW for at least 2 seconds if PS is displayed in the
radio mode, frequency will be displayed for 5 seconds.
If there is no PS (Programme Service Name)
• If there is no receivable text information or the unit cannot receive
text information properly, nothing will be displayed.
PS (Programme Service Name) *
(Blank)
(Blank)
(Blank)
Calendar
Clock
PS (Programme Service Name) *
PTY (Programme Type)
Radio Text
Radio Text
PS (Programme Service Name) *
(Blank)
FREQUENCY
(Blank)
(Blank)
(Blank)
Calendar
Clock
FREQUENCY
PTY (Programme Type)
Radio Text
Radio Text
FREQUENCY
(Blank)