Owner`s manual

16-EN
Other Functions
Displaying the Title/Text
It is possible to display the CD/Station title if the title has been
previously inputted (“Titling Discs/Stations” page 17). Text
information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
PS (Programme Service Name) → Radio Text → STATION
TITLE → FREQUENCY → PS (Programme Service Name)
The display in CD mode:
TRACK NO./ELAPSED TIME → TEXT (DISC NAME)*
1
→ TEXT
(TRACK NAME)
*
1
→ TITLE → TRACK NO./ELAPSED TIME
The display in MP3/WMA mode:
FILE NO./ELAPSED TIME → FOLDER NO./FILE NO. →
FOLDER NAME*
3
→ FILE NAME → ARTIST NAME*
2
→
ALBUM NAME*
2
→ TRACK NAME*
2
→ FILE NO./ELAPSED
TIME
*
1
Displayed during playback of a disc with CD Text.
“NO TEXT” will be displayed when the CD contains no Text data.
*
2
ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the
ID3 tag/WMA tag information is displayed (e.g., track name, artist
name, and album name). All other tag data is ignored.
“NO DATA” will be displayed when an MP3/WMA file contains no
ID3 tag/WMA tag information.
*
3
“ROOT” is displayed for a folder that does not have a folder
name.
Rotary
encoder
-/J
g
TITLE
f
BAND
Setting the Bass Control
You can change the bass frequency emphasis to create your own tonal preference.
1
Press MENU to select BASS.
2-1
Setting the bass centre frequency:
Press g or f to select the desired bass centre
frequency.
60Hz ↔ 80Hz ↔ 100Hz ↔ 120Hz ↔ 60Hz
The displayed bass frequency is emphasized.
2-2
Setting the bass band width (Q-Factor):
Press BAND to select the desired bass band
width.
→ 1 → 2 → 3 → 4
(Narrow)
←
.....................................................
→
(Wide)
Changes the boosted bass band width to wide or narrow. A
wide setting will boost a wide range of frequencies above and
below the centre frequency. A narrower setting will boost only
frequencies near the centre frequency.
2-3
Setting the bass level:
Turn the Rotary encoder to select the desired
bass level (–7~+10).
You can emphasize or weaken the bass level.
3
Press and hold MENU for at least 2 seconds to
return to normal mode.
• If no operation is performed in 60 seconds, the unit returns to
normal mode.
• The bass level settings will be individually memorized for each
source until the setting is changed. The bass frequency and bass
band width settings adjusted for one source are effective for all
other sources.
• Depending on the connected devices, some functions and display
indications do not work. However, bass level is still adjustable if an
audio processor with the bass adjustment is connected.
• This function is inoperable when DEFEAT is set to ON.
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own
tonal preference.
1
Press MENU to select TREBLE.
2-1
Setting the treble Centre frequency:
Press g or f to select the desired treble
centre frequency.
7.5kHz ↔ 10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 7.5kHz
The displayed Treble frequency is emphasized.
2-2
Setting the treble level:
Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
3
Press and hold MENU for at least 2 seconds to
return to normal mode.
• If no operation is performed in 60 seconds, the unit returns to
normal mode.
• The treble level settings will be individually memorized for each
source until the setting is changed. The Treble frequency settings
adjusted for one source are effective for all other sources.
• Depending on the connected devices, some functions and display
indications do not work. However, treble level is still adjustable if
an audio processor with the treble adjustment is connected.
• This function is inoperable when DEFEAT is set to ON.