Owner`s manual

46-EN
NOTES
*
1
When the monitor is open: displayed in the monitor
0° ↔ 180°
When the monitor is closed: displayed in the sub-display
NOR ↔ REV
*
2
When the CDA-5755 series is connected:
(Preset 1 through 4)
3 Press bass engine to return to normal mode.
NOTE
For details about external audio processor operation, see
the owner’s manual of the external audio processor.
Simultaneous Operation
You can watch the video portion of another source
while listening to current source.
1 Press V.SEL to select the video position.
Example of when not connecting the expansion
box:
(Picture) RADIO
∗1
AUX
∗2
NAV.
(Voice) RADIO RADIO RADIO
Example 1 of when connecting the expansion
box (KCE-104V):
(Picture)
RADIO
∗1
AUX1
∗2
AUX2
(Voice) RADIO RADIO RADIO
SPE.ANA
∗4
NAV. AUX3
∗3
RADIO RADIO RADIO
Example 2 of when connecting the expansion
box (KCE-104V):
(Picture) DVD DVD
∗5
AUX2
(Voice) DVD DVD DVD
SPE.ANA
∗4
NAV. AUX3
∗3
DVD DVD DVD
∗
1
The source, band, frequencies, etc., are
displayed.
∗
2
If a DVD player or DVD changer is connected,
the DVD picture will be displayed and the voice
will be produced.
With the DVD player (DVA-5205P) or DVD
changer (DHA-S680P) connected, press and
hold V. OUT on the remote control supplied
with the player or changer for at least 2
seconds to output DVD picture and sound.
∗
3
When the KCE-104V and a rear camera are
connected, the unit can receive the picture
(refer to “Setting the External Input” on page
42).
Other Useful Features
FUNC
bass
engine
V.SEL
fg
Preset buttons
(1 through 3)
Operating an External Audio
Processor (Optional)
You can operate a connected external audio
processor from the CVA-1004R.
1 When an external audio processor is connected,
press bass engine to activate Audio Processor
mode.
2 Press a preset button (1 through 3) to select
the desired function, and then g or f to
adjust settings.
When the ERA-G310/ERA-G320/CDA-5755/
PRA-H600/PXA-H510/PXA-H900 series is
connected
preset 2: Subwoofer phase control (NORMAL/
REVERSE)
∗
1
preset 3: Recalling the stored settings (Preset
1 through 6)
∗
2
When the PXA-H400 series is connected
preset 1: Bass/Treble control (-7 ~ +7)
preset 3: Recalling the stored settings (Preset
1 through 4)
When the PXA-H700 series is connected
preset 1: Setting the MX mode (MX
compatible sources only)
preset 2: Subwoofer phase control (NORMAL/
REVERSE)
∗
1
SOURCE/
PWR TITLE
→ → →
←← ←
→ → →
→ → →
←← ←