Owner`s manual
45-EN
Other Useful Features
Turning Mute Mode On and Off
If an Alpine Ai-NET Interrupt Box (NVE-K200) is
connected to the CVA-1004R, an Auxiliary Source
will be allowed to interrupt the current audio
source. For example, you can listen to the voice
guidance of your navigation system when it
occurs even while you are playing a CD or MD.
The CD/MD player will be automatically muted
during voice guidance. For further details, please
refer to the manual for NVE-K200. The CVA-
1004R can be used in combination with the add-
on Universal Hands-free Kit (KPA-100R, KPA-
105R).
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2 Press preset 5 to set to the SYSTEM setting
mode. Press preset 5 again to select the IN-INT.
MUTE mode.
3 Press g or f to select OFF.
In the mute OFF mode:
The volume level can be adjusted in the
interrupt mode.
NOTE
When the mute ON mode is selected, sound will not
produce.
For any other settings, press preset 5 or another
preset button.
4 After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTE
• Initial mode is "IN-INT. MUTE ON".
• The Auxiliary device being connected, must have an
Interrupt wire with a positive trigger, for this function
to operate automatically. Otherwise, a separate switch
needs to be added to switch manually.
Changing the Radio Frequencies
for each Country
For customers not living in Europe, change the
radio frequencies as follows.
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2 Press preset 6 to activate the OTHER setting
mode. Press preset 6 again to select A.TUNE
STEP.
3 Press g or f to select 100 kHz or 50 kHz.
100 kHz: Radio frequencies for Europe
50 kHz: Other Radio frequencies
For any other settings, press preset 6 or another
preset button.
4 After setting is completed, press MUTE/SETUP
to return to normal mode.
Switching Disc Mode
Use this function when connecting the optional
CD/DVD player, changer.
1 Press BAND/TEL. to switch the Disc mode in the
CD/DVD changer mode.
Example
→ External CD → External DVD
Changer
←
DVD changer
←