Owner`s manual

44-EN
Other Useful Features
Adjusting Source Signal Levels
If the difference in volume level between FM radio
and other sources is too great, adjust the FM
signal level as follows.
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2 Press preset 4 to select the RADIO setting
mode. Press preset 4 again to select FM
LEVEL.
3 Press g or f to select the FM signal level
HIGH or LOW to make the signal levels between
the FM band and other sources closer.
For any other settings, press preset 4 or another
preset button.
4 After setting is completed, press MUTE/SETUP
to return to normal mode.
Subwoofer Control On and Off
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds.
2 Press preset 5 to set to the SYSTEM setting
mode. Press preset 5 again to select the
SUBWOOFER mode.
3 Press g or f to select Subwoofer ON or
OFF.
For any other settings, press preset 5 or another
preset button.
4 After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTES
• Initial mode is "SUBWOOFER ON."
• Set to "SUBWOOFER OFF" unless the subwoofer is
used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Balance/Fader (page 8).
MUTE/SETUP
gg
gg
g
ff
ff
f
Preset 6
Preset 4
Preset 5
Switching the Tuner Mode
The CVA-1004R incorporates the MAX TUNE
PRO for the highest quality tuner audio. Moreover,
you can choose between three settings to suit
your personal preferences.
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2 Press preset 4 to activate the RADIO setting
mode. Press preset 4 again to select FM
CONDITION.
3 Press g or f to select the desired setting.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
For any other settings, press preset 4 or another
preset button.
4 After setting is completed, press MUTE/SETUP
to return to normal mode.
BAND/TEL.