Owner`s manual

35-EN
→
←
Setting the Treble Control
You can change the Treble Frequency emphasis
to create your own tonal preference.
1 When the monitor is open, press bass engine.
BASS ENGINE mode is displayed in the monitor.
2 Press preset 2 to select the desired mode.
3 Press g or f to adjust the selected mode.
Treble Level : -7~+7
You can emphasize the treble frequency.
Treble centre frequency:
10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
4 Press bass engine return to the normal mode.
NOTES
• If no buttons are pressed within 10 seconds, the Treble
control setting will be turned off automatically.
• Depending on the type of external audio processors
connected to the unit, you may not be able to set some
settings.
• The settings of the Treble will be individually
memorized for each source (FM, MW, LW and CD)
until the setting is changed. Depending on the
connected devices, some functions and display
indications do not work.
Other Useful Features
Operation with the monitor closed
You can set the Treble control with the monitor
closed.
1 Press bass engine.
2 Press preset 2. TREBLE is displayed for 2
seconds in the sub-display, then the value of
TREBLE Level blinks.
3 Each time you press preset 2, the blinking
shifts.
Example of sub-display
4 Press g or f to adjust the selected
mode.