Owner`s manual

23-EN
Scanning Programmes
1 Press 6 ( ) to activate the Scan mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press 6 (
) and deactivate
the Scan mode.
NOTES
• When you select “FOLDER” in the “Setting the
Range of MP3 File Selection” section on page 25, the
first 10 seconds of each File in the Folder will be
played back.
When the monitor is open: displayed in the monitor
• In case a 6-disc CD changer
or an MP3 compatible CD
changer
is connected:
In CD changer mode, press FUNC to light the "FUNC"
indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press FUNC twice to light the "FUNC"
indicator in red and go to step 1.
When the monitor is closed: displayed in the sub-display
• In case a 6-disc CD changer
or an MP3 compatible CD
changer
is connected:
In CD changer mode, press FUNC to illuminate the
"FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press FUNC twice to illuminate the
"FUNC" indicator and go to step 1.
CD/MP3/Changer Operation (Optional)
Selecting Folders
(concerning MP3)
1 Press FUNC to illuminate the “FUNC” indicator,
and press preset 1 or preset 2 to select the
folder.
File/Folder Search
(concerning MP3)
You can select an MP3 file from the file/folder
name list and play back.
1
1 When the monitor is open in MP3 mode, press
and hold the Rotary encoder for at least 2
seconds during playback.
The unit switches to File/Folder Search mode,
and the file/folder name list is displayed.
2 Press g or f to select the desired file or
folder.
Press and hold -/J for at least 2 seconds to
select File Search or Folder Search.
When the folder name list is displayed:
If there are files in the folder, a triangle appears
by the side of each folder name.
Select the desired folder and press and hold
-/J for at least 2 seconds to display file name
list, and then press g or f to select the
desired file.
When the file name list is displayed:
To search for other folders containing desired
files, press and hold -/J for at least 2 seconds
to display the folder name list.
3 Press the Rotary encoder to execute the
setting.
The selected file, or the first file of the selected
folder starts to play.
NOTE
During search, press and hold the Rotary encoder for at
least 2 seconds to cancel the File Search mode.