Owner`s manual

16-EN
DAB Operation (Optional)
Changing the Service
Services are received within the ensemble that
you are currently receiving.
1 While receiving the ensemble, momentarily
press g or f, and select the service that
you desire.
The selected service label is displayed for 2
seconds, and then you return to the display that
you select with the steps described under the
section “Changing the Display Mode” (page 19).
Changing the Service Component
You can change Audio Services of the Service
Component between the Primary and Secondary,
when listening to an Audio Service that has a
Secondary Service Component.
1 Press FUNC to turn on the “FUNC” indicator.
2 Press preset 4 to change the Service
Component between the Primary and Secondary
broadcast.
Every time you press the button the selection
toggles.
The Component label is displayed for 2 seconds,
and then you return to the display that you
selected with the steps described under the
section “Changing the Display Mode” (page 19).
NOTE
If there exists a Secondary Service Component within a
service, the indicator “S” blinks on the display, “P”
indicator lights ON. When receiving the Secondary
Service Component, the indicator “S” remains lit “P”
indicator lights OFF.
Memorizing the Service
1 Select the service that you want to memorize.
2 Press any one of the preset buttons (1 through
6) for at least 2 seconds while the “FUNC”
indicator light goes out. The selected service is
memorized.
3 To memorize more, repeat the above steps 1 and 2.
NOTES
• You can memorize up to 18 stations (6 stations for
each band; DAB1, DAB2, DAB3).
• If you select a preset button that has already
memorized a service, the new selection takes it over.
• When you are not receiving DAB, the service is not
memorized. (Memorize the service when the DAB
reception is good.)
Receiving the Memorized Service
1 Press BAND/TEL. to select your desired band.
2 Press one of the preset buttons (1 through 6).
The selected service is received.
By selecting the mode in the “Changing the
Display Mode” section ( page 19), the display
shows the status of the broadcasting stations
that have been received as follows:
Channel No. Display:
The channel numbers of received stations are
displayed.
Ensemble Label Display:
The Ensemble Label of received station is
displayed.
Service Label Display:
The Ensemble Label is displayed for 2 seconds
and then the Service Label is displayed after
receiving the broadcasting station.
Component Label Display:
The Ensemble Label is displayed for 2 seconds,
then the Service Label is displayed for 2
seconds, and then the display is changed to the
Component Label after receiving the
broadcasting station.
Dynamic Label Display:
The Ensemble Label is displayed for 2 seconds,
then the Service Label is displayed for 2
seconds, and then the display is changed to the
Dynamic Label after receiving the broadcasting
station.
NOTE
When you receive the Secondary Service Component, you
memorize the service, but when you call out this
memorized service, the Primary Service Component will
be called out.
gg
gg
g
ff
ff
f FUNC
2/PTY
BAND/TEL.
Preset buttons
(1 through 6)
T.INFO/
ANNC.
Preset 4
TUNE/A. ME