Instructions / Assembly

Stainless Steel Jumbo Bathroom Tissue Dispenser
Item# 482
Installation
1. Please choose a vertical, clean and smooth mounting surface.
2. Make sure there is enough room above dispenser to access the lock.
3. Unlock the front cover and use the back plate for the drill marks and mark the 3 drill locations.
4. Drill 3 holes at marked locations and insert 3 plastic anchors (not supplied) into drilled holes.
5. The installation should be done with a flat washer (not supplied) between the head of the screw and inside back of
the dispenser.
6. Complete the installation.
Specifications
Roll Diameter: 9 inches
Core Diameter: 2 ½ inches