Product Manual

HAZEL
CLEANING / MAINTENANCE
Before servicing or cleaning the unit, switch power to off at the service panel. Lock to
prevent power from being switched on accidentally.
If you cannot lock the service panel, securely fasten a prominent warning device, such as a
tag, or label, to the panel.
WARNING:
Do not pressure-wash the unit.
Do not clean the filter or allow it to come in contact with water.
OUTSIDE
Gently wash cover and air inlet holes using a soft cloth, lukewarm water, and a non-
abrasive cleaner.
INSIDE
Alpine recommends regularly checking and cleaning the insides of your machine to ensure
proper performance. Use a soft dry cloth or brush to gently remove dust from parts and
inlet holes. If your unit contains a filter, be sure it does not come in contact with water.
INSTALLATION GUIDE
WARNING
For proper electrical connections, check your local building codes.
If hard wired, unit must be installed by a qualified, licensed electrician.
PRE INSTALLATION WIRING
Ensure that the electrical supply corresponds to that shown on the rating sticker of
unit. Permanent damage to the unit may result. If connected to any electrical
supply other than that stated on the rating sticker of the unit,
Confirm that the electricity at the main panel is switched to off before installing or
maintaining the unit.
The unit must be protected by an independent circuit.