Product Manual

HEMLOCK
USER SUGGESTION
To confirm correct hand location, position hands so that LED light is visible on them.
CLEANING / MAINTENANCE
Before servicing or cleaning the unit, switch power to off at the service panel. Lock to
prevent power from being switched on accidentally.
If you cannot lock the service panel, securely fasten a prominent warning device, such as a
tag, or label, to the panel.
WARNING:
Do not pressure-wash the unit.
Do not clean the filter or allow it to come in contact with water.
OUTSIDE
Gently wash cover and air inlet holes using a soft cloth, lukewarm water, and a non-
abrasive cleaner.
INSIDE
Alpine recommends regularly checking and cleaning the insides of your machine to ensure
proper performance. Use a soft dry cloth or brush to gently remove dust from parts and
inlet holes. If your unit contains a filter, be sure it does not come in contact with water.
INSTALLATION GUIDE
WARNING
For proper electrical connections, check your local building codes.
If hard wired, unit must be installed by a qualified, licensed electrician.
PRE INSTALLATION WIRING
Ensure that the electrical supply corresponds to that shown on the rating sticker of unit.
Permanent damage to the unit may result if connected to any electrical supply other than
that stated on the rating sticker of the unit.