User manual

40-EN
Car Setup
[Car] is selected on the General Setup Menu screen in step 1. See
“General Setup” (page 30).
Set this item when Apple CarPlay is used/Android smartphone which
installed Android Auto App is connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering wheel
Setting contents:
Left (Initial setting) / Right
Vehicle Setup enables you to check the connection status of Reverse
Lead/Parking Brake Lead.
Setting item:
Installation Status
The Installation check screen is displayed.
[Sources] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 27).
Sources Setup Menu screen
<Setting items>
*1 This setting cannot be changed while the AUX source is being selected.
*2 This setting is only available when “AUX” is set to “On” ( ).
*3 This setting cannot be changed while the HDMI source is being
selected.
*4 This setting cannot be adjusted when an iPod/iPhone is connected or
Apple CarPlay/iPod source is being selected.
1 Select the desired item.
2 To switch the setting, touch [], [], [], [], or mark the
checkboxes “Off” ( ) or “On” ( ).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
3 Tou ch [] to return to the main source screen.
• To return to the previous List screen, touch [] or [] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 17).
Steering wheel Setting
Installation Setup
Sources Setup
Radio
PI Seek
RDS Regional
PTY Language
PTY31
FM Tuner Setting
DAB
Alarm
Announcement Mode
FM Linking
DAB Antenna Power
AUX*
1
AUX Name*
2
Direct Touch*
2
Signal*
2
HDMI*
3
Apple CarPlay*
4
The following steps 1 to 3 are common to each “Setting
item” of Audio Setup. See each section for details.