Installation Guide

4-EN
For safe use, make sure of the following:
• Location is stable and firm.
• Driver’s view and operations are not obstructed.
• Microphone is located where the driver’s voice can be easily
picked up (for example, on the sun visor).
When you speak into the microphone, you should not have to change
your driving posture. This may cause a distraction, taking your
attention away from safely driving your vehicle. Carefully consider
direction and distance while mounting the microphone. Confirm that
the driver’s voice can be easily picked up at the selected location.
1 Mount the original mounting bracket to the unit using
the supplied screws.
* To securely connect the ground lead, use an already installed screw on a
metal part of the vehicle (marked ( )) or a clean, bare metal spot on the
vehicle’s chassis.
2 Connect all other leads of the unit according to details
described in the “Connections” (page 5).
3 Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking them into
movable parts, such as a seat rail, or by locating them against sharp or
pointed edges.
Note on using HDMI Connection Cables
When using HDMI connection cables, secure the cables to the HDMI
Terminals with the supplied HDMI Fixation Bracket.
1 Slide the HDMI Fixation Bracket into the grooves (A).
2 Secure it with the screw (B).
Mounting the Microphone
Installation example using the Original
Mounting Bracket
Microphone
Cable clamp
(Sold separately)
Ground Lead*
Chassis
Screws (M5 × 8) (Included)
Original Mounting Bracket
Face plate (Included)
HDMI Terminal
(A)
(B)
HDMI Fixation Bracket
(Included)
(A)