User manual

54-EN
Setting the Balance/Fader/Subwoofer
[Balance/Fader/Subwoofer] is selected on the Sound setup menu in
step 3. Refer to “Sound Setup Operation” (page 53).
Touch the desired point within the image area. Or touch
[] [] [] [].
Balance: L15 to R15
Fader: F15 to R15
You can set the rear speaker output to “Off”.
Setting item: Rear Speaker
Setting contents: On (Initial setting) / Off
• Note that if you select “Off” when the Rear Speaker Position in Car
Specific Sound Setup is set to “Rear Deck” or “Rear Door/Panel”,
the setting in Car Specific Sound Setup will be cancelled.
If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: SubW.
Setting contents: On / Off (Initial setting)
• Note that if you select “Off” when Subwoofer Installed in Car
Specific Sound Setup is set to “Yes”, the setting in Car Specific
Sound Setup will be cancelled.
You can set the Subwoofer level when a Subwoofer is connected.
Setting item: SubW. LEVEL
Setting contents: 0 to 15 (Initial setting: 0)
• If the Subwoofer setting is “Off”, the setting cannot be set.
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: SubW. Phase
Setting contents: 0° (Initial setting) / 180°
• If the Subwoofer setting is “Off”, the setting cannot be set.
Setting the MX (Media Xpander)
[Media Xpander] is selected on the Sound setup menu in step 3. Refer
to “Sound Setup Operation” (page 53). When the currently playing
source is AM radio band (MW/LW), this option is not available.
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, DAB, CD, USB memory
and iPod/iPhone, will be able to reproduce the music clearly even in
cars with a lot of road noise.
Setting item: Media Xpander
1 Touch [ON] of “ALL MX OFF/ON” in the MX setup
screen.
Setting the Balance/Fader
Rear Speaker Setting
Turning Subwoofer ON/OFF
Image area
Adjusting the Subwoofer Level
Setting the Subwoofer Phase