User manual

30-EN
About the Indicator Display
The Indicator Bar at the bottom of the screen displays various types of
information, like the current time.
The display will differ depending on the source. For
details, refer to the display example of each source.
Lights up when connected to a BLUETOOTH
compatible device. (
Does not display when connection is
set to OFF.
)
: BLUETOOTH connection to audio device
: BLUETOOTH connection to Hands Free Phone
Blinks while reconnecting.
Indicates the battery level of the connected
BLUETOOTH device.
This may not be displayed depending on the connected
BLUETOOTH device.
Indicates the signal strength level of the connected
BLUETOOTH compatible device.
Displayed when BLUETOOTH setting is ON.
The clock display
You can switch between the 12 hour display and 24 hour
display options.
For details of the clock display settings, refer to “Navigation
System OM” in the CD-ROM.
Parking Assist Interrupt Function
When the unit is connected to the vehicle equipped CAN Interface box.
A Parking Assist screen may be tuned in if the obstacle within a certain
distance is detected by the front or rear sensor of your vehicle.
Please set Parking Assist Interrupt to On before using this function.
(Page 52)
• Depending on your vehicle, this function may not be supported.
• Depending on the vehicle speed, when the speed is greater than a
certain value, the Parking Assist screen may not be displayed.
When the obstacle within a certain distance is detected
by the front or rear sensor, the Parking Assist screen
displays and the indicator ( ~ ) of the corresponding
area lights up.
According to the distance from far to near, the colour of indicator
from yellow to orange to red.
Display example for Parking Assist screen
• If the parking assist interruption occurs during the camera mode, a
small parking assist image will display on the right side of camera
screen. Touch the image can see the full screen of parking assist
mode.
Battery
Level
No Battery Level 1 Level 2 Level 3
Icon
0123No Service