Navigation Software Manual

8
7. The initial setup is now complete. The Configuration wizard can be restarted later from
the Settings menu (page 70).
After the initial setup, the Map screen appears and you can start using the software.
2.1 Buttons and other controls on the screen
When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, the software saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type
Example
Descriptio
n
How to
use it
Button Tap it to
initiate a
function, to
open a new
screen, or to
set a
parameter.
Tap it once.
Button
with
value
Some buttons
display the
current value
of a field or
setting. Tap
the button to
change the
value. After
the change,
the new value
is shown on
the button.
Tap it once.
Icon
Shows status
information.
Some icons
also function
as a button.
Tap them
once.