User manual

84-EN
Side Camera Operation
1 Press the MENU button.
The menu screen is displayed.
2 Tou ch [Camera].
The Side Camera view is displayed.
Touch the screen while the camera image is being displayed, and touch
[] or [] to return to the main source screen or previous screen.
You can perform a Guide Adjustment. For details, see “Adjusting the
Rear/Front/Side Camera Guide” (page 43).
If you connect a Side Camera using the optional Multi Camera
Interface module, you can display the Side camera image using the
[Camera] button only when you set “Setting a Default Camera
(page 44) to “Side”. If you connect a Rear Camera and Front Camera at
the same time, touch [Rear] or [Front] in the Rear Camera image to
switch the Camera image.
If the camera has a view switch function, the Direct Change switch is
displayed.
1 Touch the screen when the image from the side camera
is displayed.
The operation screen is displayed on the screen.
After a 5-second time-out, the operation screen returns to the
camera display screen.
2 Tou ch [Rear] or [Front].
The image pattern changes.
For detailed information about image patterns, see the camera Owner’s
Manual.
You can perform a Guide Adjustment. For details, see “Adjusting the
Rear/Front/Side Camera Guide” (page 43).
Displaying the Side Camera image from the
Menu screen
Switching the Image Pattern for the Side
Camera
Rear: Vehicle Rear view
Front: Vehicle Front view
[Camera] button