User manual

44-EN
Turning Guide Display On/Off (Rear/Front Camera only)
Turning the selected guide off.
1 Tou ch [On/Off].
The currently selected guide will turn off.
2 To turn the guide on, touch [On/Off] again.
• Guides that are turned off are still adjustable.
Returning Guides to Default
1 Tou ch [Default].
A message window will appear.
2 Tou ch [OK].
Adjusted values will return to default settings.
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is “Rear.”
Setting item:
Interrupt (Power OFF)
Setting contents:
On (Initial setting) / Off
If your vehicle support the Rear camera with audio function, you can set
whether to listen to the outside sound when the gear lever is moved to
reverse(R) position. (e.g. the shouts of people outside your vehicle)
You can select this item only when Camera Select is "Rear" and current
source is not AUX.
Setting item:
Camera with Audio
Setting contents:
Off (Initial setting) / On
When connecting the optional Multi Camera Interface module, you can
connect up to 3 cameras as Front Camera/Rear Camera/Side Camera.
• When using the optional Multi Camera Interface module, select
“Camera Selector” to set the “Front Camera /Rear Camera/Side
Camera” to ”On”( )/”Off”( ).
Setting item:
Front Camera / Rear Camera / Side Camera / Default Camera*
1
Setting contents:
Off (Initial setting) / On
*1 You can change the Default Camera only when you set more than one
camera for Front Camera/Rear Camera/Side Camera to “On.” For
details, see “Setting a Default Camera” (page 44).
*2 You can select this item only when Rear Camera is selected and current
source is not AUX.
Setting a Default Camera
When connecting an optional Multi View Camera, you can set which
camera image is displayed when you touch the Camera button on the
Menu screen.
Setting item:
Default Camera
Setting contents:
Front / Rear / Side
• The initial setting differs depending on the cameras set to “On” in
“Setting Multi Camera to On/Off.”
CAN-I/F Setup
[CAN-I/F] is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 42).
• CAN I/F BOX should be connected before this operation.
Touch the Menu screen (page 19) to display the Info mode screen, and
then set the following.
Setting item:
Default Vehicle Screen
Setting contents:
Climate / Park sensor / Last mode (Initial setting)
• For details on the Vehicle Info mode screen, see “About Vehicle Interlock
Function” (page 85).
Camera Interrupt Setting (Power OFF Mode)
(Rear Camera Only)
On: The rear camera image is displayed
Off: The rear camera image is not displayed
Setting Camera with Audio On/Off
On: The sound outside the vehicle will be transmitted inside
via speakers.
Off: The sound outside the vehicle will not be transmitted
inside via speakers.
Setting Multi Camera to On/Off
Camera
Signal:
See “Setting the Camera Input” (page 42)
Guide
Adjustment:
See “Adjusting the Rear/Front/Side Camera Guide”
(page 43)
Camera
Interrupt
(Power Mode):
See “Camera Interrupt Setting (Power OFF Mode) (Rear
Camera Only)” (page 44)
Camera with
Audio*
2
:
See “Setting Camera with Audio On/Off” (page 44)
Setting the Default Vehicle Screen