Navigation Software Manual

38
Tip!
If you already have a planned route, tap and
to add the selected location to your route.
4. Tap to select the cursor as the destination.
5. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap to modify the
route parameters, or tap to start your journey.
3.1.8 Planning a Multipoint Route
To build your route destination-by-destination, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is
normally the current GPS position.
4. Tap to select the destination.