Manualshelf

Installation Guide

ManualsBrandsAlpine Electronics ManualsGPS Navigation SystemsX109-WRA
6789101112131415
Jeep Wrangler
WRANGLER 11/15
Installation Instructions
2 Position X109D source unit on top of X109 DVD/
Display unit as shown, and attach the mounting
brackets using the provided (8) 8mm screws and
rear support rubber cap screw.
4 Route the USB extension cable to the glove box,
connect the main harness and other adapters to the
factory harness and secure them.
6 Connect the radio bezel and snap it into place.
A/C
A/C
1 Attach the modified panel using the factory screws.
3 Attach the rear support bracket using (2) 7mm
factory screws.
5 Route the key harness through the top-left side of
the X109D source unit. Mount the X109D source
unit using (4) 7mm factory screws.