Installation Guide

Chevrolet/GMC

FULL SIZE TRUCK & SUV  9/20

Factory unit disassembly process

1 Use a panel removal tool to carefully unsnap the

trim bezel around the radio and HVAC controls.

2 Extract (8) 9/32” – 7mm screws securing the radio,

HVAC and cigarette lighter panel. Disconnect and

remove in the order shown.

3 Remove and disconnect by order number shown.

4 Remove driver side center console panel by

unsnapping it

5 Move the factory wire harness to the back of the

dash by accessing through the drivers side center

console area.