User manual

88-EN
Antenna Receptacle
ISO/JASO Antenna Adapter (sold separately)
ISO/JASO Antenna Adaptor may be required, depending on
the vehicle.
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
Video Input/Camera Input RCA Connector
(AUX/CAMERA IN) (Yellow)
Input the AUX video or use when connecting a rearview
camera with RCA Output connector.
• Set “AUX” in “Setting the Rear Camera Input” (page 44) when
connecting a rearview camera with RCA Output connector.
• When you use this connector as normal AUX video input connector,
set other than “AUX” in
“Setting the Rear Camera Input” (page 44),
and set “AUX1 IN” to ON in “Setting the AUX Mode”.
Audio Input Connector (AUX/CAMERA IN)
RED is right and WHITE is left input the audio.
Rear Output/Input RCA Connectors
It can be used as Rear Output or Input RCA connectors.
RED is right and WHITE is left.
Front Output/Input RCA Connectors
It can be used as Front Output or Input RCA connectors.
RED is right and WHITE is left.
Subwoofer Output RCA Connectors
RED is right and WHITE is left.
RCA Extension Cable (sold separately)
RGB Input Connector (Black)
Connect this to the RGB output terminal of the Navigation
System.
USB Connector
Connect this to an USB Memory/Portable audio player or to
an iPod/iPhone. To use an iPod/iPhone, Interface cable for
iPod connection is required.
• Use the supplied USB cable. If a USB cable other than the supplied is
used, correct performance cannot be guaranteed.
• Route the USB cable away from other cables.
Direct CAMERA Input Connector
Use when the optional rearview camera (such as
HCE-C107D, etc.) is connected.
• Set “Direct” in “Setting the Rear Camera Input” (page 44) when
connecting a rearview camera with Direct Output connector such as
HCE-C107D.
BLUETOOTH interface connector (Blue)
Connect this to an optional BLUETOOTH INTERFACE
(KCE-400BT). To use a hands-free mobile phone, an
optional BLUETOOTH INTERFACE (KCE-400BT)
connection is required. For details on connection, refer to
the Owner’s Manual of the BLUETOOTH INTERFACE
(KCE-400BT). You can also connect this to an external
device (such as a portable player) by using Conversion
cable (KCE-237B) for building up the AUX IN (sold
separately).
• Refer to “Setting the AUX+ Mode” on page 46.
KCE-400BT Connection Cable (Included with
KCE-400BT)
Steering Remote Control Interface Connector
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
• Cautions on connection with the DHA-S690:
Set “Setting the Connected Head Unit (MODEL SETUP)” on the
DHA-S690 to DVD CHG.
Ai-NET Cable (Included with CD Changer)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
Audio Interrupt In Lead (Pink/Black)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-D511RB/IVA-D511R.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
ON: When the external device is connected.
OFF: When set to OFF, AUX+ source cannot be selected.