User manual

60-EN
Displaying the phone service provider name
Setting item : Service Provider
The service provider name of the connected BLUETOOTH
compatible device will be displayed. If a BLUETOOTH
compatible device is not connected, “ID UNSENT” will be
displayed.
• Depending on the character type some phone service provider name
cannot be displayed.
Setting the Search Mode
You can set whether KCE-400BT can be recognized or not from
a BLUETOOTH compatible device. Normally set this to Visible
Mode ON.
Setting item: Visible Mode
• Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone’s passcode, refer to the
mobile phone’s Owner’s Manual.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it
automatically or not.
Setting item: Auto Answer
• If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
Selecting the output speaker
You can select the connected speaker in car to output the sound
signal of telephone.
Setting item : Speaker Select
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• When an IMPRINT audio processor (PXA-H100) or External Audio
processor (PXA-H701, etc.) is connected, the default setting All will
be set and cannot be adjusted.
Adjusting the volume for the microphone input
You can emphasize or weaken the microphone input volume
level.
Setting item : MIC Input
Tou ch [ ] or [ ] to select the desired volume level (0 ~15).
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• The setting can be adjusted only when the BLUETOOTH compatible
device is connected.
Displaying the firmware version
Setting item : Firmware Version
The current firmware version of KCE-400BT will be displayed.
Updating the firmware
Setting item: Firmware Update
Future BLUETOOTH firmware update of KCE-400BT (for phone
compatibility) at customer end will be available for this unit.
For information to update your BLUETOOTH firmware, please
visit your local Alpine web site or choose your country from
Alpine Europe top page (http://www.alpine-europe.com).
Hands-Free Phone Control
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
ON: Enables recognition of KCE-400BT from the
BLUETOOTH compatible device.
OFF: Disables recognition of KCE-400BT from the
BLUETOOTH compatible device.
ON: When a call is received, it will be taken
automatically after about 5 seconds.
OFF: When a call is received, it will not be
received automatically. If a message is
displayed and
[ ] is touched when a call is
received, you can receive the call.
All: The sound be output from all of speakers in car.
F-L: The sound only be output from the front left
speaker.
F-R: The sound only be output from the front right
speaker.
F-LR: The sound be output from the front left and front
right speaker.
About the Hands-Free Phone