User manual

58-EN
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Setting item: DVD Level
Adjust the level by touching [ ] or [ ] of the desired
adjusting mode.
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
Setting item: PCM Mode
Touch [ ] or [ ] of PCM Mode to select 2CH or 3CH.
• This adjustment is ineffective when the speaker is set Center to OFF
in
“Setting the Speakers” (page 56).
Storing Settings in the Memory
Adjustment or setting contents can be stored.
Contents that can be stored vary depends on the audio processor used.
1 Touch [MEMORY] on the A.Processor list display.
2 Within 5 seconds, touch any one of the preset
buttons [P.SET
1] through [P.SET 6] on the
A.Processor list screen.
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.
Calling up the Preset Memory
Touch any one of the preset buttons [P.SET 1] through
[P.SET
6] on the A.Processor list display to select the
preset memory.
• You can adjust this setting in main source screen by touching [ ]
directly.
• It takes a few moments to call up the preset memory.
When the optional BLUETOOTH INTERFACE (KCE-400BT) is
connected to this unit, the following operation can be performed.
Setup Before Using
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4
GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.BLUETOOTH.com/).
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before using the hands-free phone/audio function, the following
settings need to be made.
1 Set “BLUETOOTH IN” to Adapter (page 46).
2 Turn the ignition key off (ACC OFF) and on again
(ACC ON).
• Before using a hands-free phone, it must be paired with this unit.
Refer to
“BLUETOOTH Setup” (pages 59-60).
Adjusting the DVD Level
Linear PCM Setting
2CH: 2ch output (L/R)
3CH: 3ch output (L/R/CENTRE)
BLUETOOTH
Operation
(Optional)
About BLUETOOTH
Before Using Hands-Free Function