User manual

46-EN
Setting item: AUX2 IN
Setting contents: iPod Video / AUX
• When the current source is iPod video or AUX-2, this setting cannot
be adjusted.
Touch the title bar of AUX1 IN or AUX2 IN, the following further
setting items can be adjusted.
Adjusting the External Input Audio Level
Further Setting item: Level
Setting contents: Low / High
• For AUX1, this setting item is adjustable only when AUX1 IN is set to
ON.
• For AUX2, this setting item is adjustable only when AUX2 IN is set to
AUX.
Switching the Visual Input Signal System
Further Setting item: Signal
Setting contents: NTSC/PAL / Auto
• The video input type can be changed.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
• For AUX1, this setting item is adjustable only when AUX1 IN is set to
ON.
• For AUX2, this setting item is adjustable only when AUX2 IN is set to
AUX.
Outputs the picture/Sound of the source selected on the IVA-D511RB/
IVA-D511R connected to the rear monitor.
Setting item: AUX Out
Setting content: OFF / ON
Setting item: BLUETOOTH IN
Setting contents: OFF / Nav. / Adapter
• For details on BLUETOOTH operation, refer to the Owner’s Manual
of the BLUETOOTH INTERFACE.
• If mobile phone compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: Optical Out
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
You can input the audio of an external device, (such as a Portable audio
player) to the BLUETOOTH interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
A portable music device and a BLUETOOTH INTERFACE
(KCE-400BT) cannot be connected to the BLUETOOTH interface
connector at the same time.
Setting item: AUX+ IN
Setting contents: OFF / ON
• When OFF is selected, the settings related to AUX+ cannot be
changed from this unit.
After setting to ON in “Setting the AUX+ Mode”, this setting can be
carried out.
Setting item: AUX+ Level
Setting contents: Low / High
Setting item: Illumi Color
IVA-D511RB:
Setting content: Blue / Red
IVA-D511R:
Setting contents: Green/Amber
iPod Video: Set when an iPhone or a video compatible iPod is
connected to the iPod (V)/AUX Input Connector.
AUX: Set when an optional AV/RCA interface cable
(4-pole mini AV plug to 3-RCA) is connected. A DVD
player etc., with RCA audio/video output can be
connected to this unit. In this case, the iPod video
will not be displayed.
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Setting the Picture/Sound Output
ON: The “Rear” item is displayed on the Source Selection
screen.
Touch [Rear] to change to the REAR select screen, then
touch the desired source. The selected source picture is
output on the rear monitor.
OFF: The “Rear” item is not displayed on the SOURCE select
screen.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
OFF: Select to ignore any external interrupts.
Nav.: Select when an optional Portable Navigation is
connected.
The Telephone screen of the portable navigation is
displayed.
Adapter: Select when an optional BLUETOOTH INTERFACE
is connected.
When an external interruption occurs, the display
changes to the Telephone screen.
Setting the Digital Output
Setting the AUX+ Mode
OFF: AUX+ source is not displayed.
ON: AUX+ source is displayed.
Setting the AUX+ Level
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Changing the Lighting Colour of Buttons
Blue: Lighting colour is blue.
Red: Lighting colour is red.
Green: Lighting colour is green.
Amber: Lighting colour is amber.