User manual

44-EN
System Setup Operation
1 Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2 Touch the title bar of System Setup.
The System Setup screen appears.
3 Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
IN Int. Mute*
1
/ IN Int. Icon / Remote Sensor*
2
/ Camera IN /
Nav. IN / Nav. Mix*
3
/ AUX1 IN*
4
/ AUX2 IN / AUX Out /
BLUETOOTH IN / Optical Out / AUX+
IN / AUX+ Level*
5
/
Illumi Color
*
1
When OFF is set in “Setting the BLUETOOTH Connection
(BLUETOOTH IN)” (page 46), the item is displayed.
*
2
When ON is set in “Setting the Picture/Sound Output” (page 46), the
item is displayed.
*
3
When ON is set in “Setting the Navigation Mode” (page 45), the item
is displayed.
*
4
The AUX1 IN setting item will not be displayed when the “AUX” is
select in
“Setting the Rear Camera Input” on page 44.
*
5
When AUX+ IN is ON, the item is displayed.
4 Touch [ ] to return to the previous screen.
• Touching [Exit] will turn off the System Setup screen, and return to
previous main screen.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the
IVA-D511RB/IVA-D511R, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to the
voice guidance of your navigation system when it occurs even while
you are playing a CD or DVD. The CD/DVD player will be
automatically muted during voice guidance. For further details, please
refer to the manual for NVE-K200.
Setting item: IN Int. Mute
Setting content: OFF / ON
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
• If Adapter or Nav. is set in “Setting the BLUETOOTH Connection
(BLUETOOTH IN)” (page 46), the IN Int. Mute setting item is not
displayed.
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN Int. Icon
Setting content: INT / TEL
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: Remote Sensor
Setting contents: Front / Rear
• The touch panel rear monitor sensor has priority over the remote
control sensor. If the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched, the
command is executed regardless of the remote control sensor switch
setting. Note, however, that the remote control sensor that has been
set takes priority if it has been 5 seconds since last touching the
panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to Rear, some onscreen button operations
(
[ ] Stop, etc.) cannot be performed.
In this case, set the remote control sensor to Front.
With an optional rear camera connected, rear view video is output to the
monitor. Depending on the connected rear camera, set this item to
“Direct” or “AUX”.
Setting item: Camera IN
Setting contents: OFF / Direct / AUX
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
After setting this item to Direct or AUX, touch the title bar of Camera
IN, the following further setting items can be adjusted.
System Setup
The Parking Brake must be engaged to access the System mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
The following steps 1 to 4 are common operations to each
“Setting item” of System Setup. Refer to each section for details.
Setting the External Device Interrupt Mode
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output. The icon set in “Setting the
Interrupt Icon Display” is displayed.
Setting the Interrupt Icon Display
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Switching the function of the remote
sensor
Front: The remote sensor of this unit is effective.
Rear: The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
Setting the Rear Camera Input
OFF: The Camera mode is not displayed in the mode
switching screen.
Direct: Use when the optional rearview camera such as
HCE-C107D, etc. is connected.
AUX: Used when connecting to an optional rearview
camera with RCA output connector.