User manual

42-EN
Setting item: Tint
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each colour.
• Tint adjustment can be made only in the iPod video, DVD, Video CD,
AUX modes.
• When the picture from the external input is set to PAL, you cannot
adjust the Tint.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
Setting item: Contrast
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
Setting item: Sharp
Setting content: -5 to +5
Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”
appear as the minimum and maximum values specified.
• Picture quality adjustment can be made only in the iPod video, DVD,
Video CD, AUX modes.
• Picture quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, Picture Quality and Contrast.”
Setting item: User Memory
Setting content: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Colour,
Sharpness, and Contrast” (
pages 41-42), touch [ ] or
[ ] of User Memory and then select preset number “P-1”
or “P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [Memory].
The adjusted Visual EQ mode is stored by the above
operations.
• You can recall the Visual EQ mode stored here from P-1 or P-2 of
“Selecting the Visual EQ Mode (Factory’s setting)” (page 41).
General Setup Operation
1 Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2 Touch the title bar of General Setup.
The General Setup screen appears.
3 Touch [ ], [ ] or the title bar of setting item, etc., of
the desired item to change its setting.
Setting items:
Clock / Clock Mode / Clock Adjust / Summer Time /
Demonstration / Beep / Auto Scroll / Language Sel. /
Dimmer Level
4 Touch [ ] to return to the previous screen.
• Touching [Exit] will turn off the General Setup screen, and return to
previous main screen.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
The clock indication on the monitor display is turned on or off
respectively.
Setting item: Clock
Setting content: OFF / ON
• When you set to ON, the clock will be displayed on sub display when
the power is off.
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting item: Clock Mode
Setting contents: 24h / 12h
Adjusting Tint of Picture
Adjusting Image Contrast
Adjusting Picture Quality
Storing Visual EQ
General Setup
The Parking Brake must be engaged to access the General mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
The following steps 1 to 4 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
Displaying the Time
Setting the Clock Display