User manual

40-EN
Setting item: Open / Close
Setting content: Manual / Full / Close
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting content: Auto / ON / OFF
• When ON or Auto is set, the setting is also applied for the button
lighting in
“Adjusting the Dimmer of Button Lighting at Night”
(page 43).
• This setting is also effective for sub-display.
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: Screen Dimmer Level
Setting content: –15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
By setting to ON, the function guide will be hidden if no operation is
performed for 5 seconds in Radio source, USB source, etc. To display
the function guide, touch the screen slightly.
Setting item: Function Guide Fade
Setting contents: OFF/ON
• In DVD play mode, the function guide will be hidden if there is no
operation for 5 seconds even if you set OFF.
You can choose from 4 different colours for the font background.
Setting item: Base Color
Setting contents: Blue/Red/Green/Amber
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
Setting content: / Reset
1 Touch the title bar of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the Display
Setup mode screen.
• If you have touched a location other than the mark, touch [Reset]
to restore the adjustment screen to the initial setting.
• If you touch [ ] on the adjustment screen, no adjustment is done
and the Display Setup screen is restored.
Setting Automatic Opening/Closing of the
Monitor
Manual: The monitor is manually opened or closed by
pressing OPEN/CLOSE.
Full: The monitor automatically opens or closes when the
ignition key is turned to the “ACC” or “ON/OFF”
position.
Close: The monitor automatically closes when the ignition
key is turned OFF.
Setting the Brightness of the Backlighting
Auto: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
ON: Keep the background illumination of the monitor dark.
OFF: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
Adjusting the Minimum Level of Backlight
Turn the Function Guide ON/OFF
(Function Guide Fade)
Switching the Font Background Colour
Adjusting the Touch Panel