User manual

11-EN
Accessory List
• Head unit .............................................................................1
• Power Cable ........................................................................1
• Pre OUT/AUX cable .............................................................1
• Mounting Sleeve ..................................................................1
• Mounting Bracket ................................................................2
• Flush Head screw (M4 x 5)..................................................8
• Hexagon washer-head screw (M4 x 6)................................4
• Rubber Cap .........................................................................1
• Hex Bolt ...............................................................................1
• Front Frame .........................................................................1
• USB extension cable ..........................................................1
• Carrying bag .......................................................................1
• Owner’s Manual .............................................................1 set
Location of Controls
Rotary encoder/MODE/MUTE
Adjust the volume by turning to the left or right.
Press to display the Audio mode screen. The Balance/
Fader, Subwoofer Level, Defeat mode can be adjusted in
this mode.
Press and hold for at least 2 seconds to activate/deactivate
the mute mode.
SOURCE/ button
Turns the power on. Press and hold for at least 3 seconds to
turn the power off.
Monitor open: Recalls the SOURCE selection screen.
Monitor closed: Changes the source.
Sub Display
Refer to “About Sub Display” on page 73.
Track tune button
Press to select the desired Radio preset station/track/file/
chapter.
Remote Sensor
Point the optional remote control transmitter towards the
remote sensor within a range of 2 meters.
Power/Operation Indicator
This indicator is lit when power is on.
Blinks when operation is done.
button
Ejects a disc.
button
Use this button to remove the front panel.
OPEN/CLOSE button
Press to open/close the monitor.
FLAT button
Press to set the open monitor to the flat position.
DISC Slot Indicator
Lights up when power is on.
VISUAL button
Monitor open: Press to recall the VISUAL selection screen.
Monitor closed: Press to toggle the text information, tag
information, etc. on the Sub display.
BAND/TA button
Radio mode: Changes the band.
Press this button for at least 2 seconds to turn the T.INFO
mode ON or OFF.
Main Display
Getting Started
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when
an Alpine Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
• The buttons on the face of this unit are shown in bold
(e.g. SOURCE/ ). The onscreen buttons that appear in the
display are shown in bold enclosed by [ ] (e.g.[BAND]).